Sharp AR-M200 operation manual Software License, Laser information

Page 7

ENVIRONMENTAL INFORMATION

Products that have earned the ENERGY STAR® are designed to protect the environment through superior energy efficiency.

Laser information

Wave length	780 nm +15 nm
	-10 nm
Pulse times	12.88 µs ±12.88 ns/7 mm
Output power	Max 0.2 mW

At the production line, the output power of the scanner unit is adjusted to 0.18 MILLIWATT (Total Power) PLUS 5% and is maintained constant by the operation of the Automatic Power Control (APC).

Caution

Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

This Digital Equipment is CLASS 1 LASER PRODUCT (IEC 60825-1 Edition 1.2-2001)

A small amount of ozone is produced within the unit during operation. The emission level is insufficient to cause any health hazard.

Note:

The present recommended long term exposure limit for ozone is 0.1 ppm (0.2 mg/m3) calculated as an 8 hr. time-weighted average concentration.

However, since the small amount that is emitted may have an objectionable odor, it is advisable to place the unit in a ventilated area.

SOFTWARE LICENSE

The SOFTWARE LICENSE will appear when you install the software from the CD-ROM. By using all or any portion of the software on the CD-ROM or in the machine, you are agreeing to be bound by the terms of the SOFTWARE LICENSE.

5

Image 7

Contents AR-M200 AR-M201 Page Contents Specifications Index User Programs Selecting a Setting for a User Program20 cm Important points when selecting an installation site10 cm Do not touch the photoconductive drum green portion Trademark acknowledgementsLaser information Software LicenseConventions used in this manual and online manual Using the manualOnline Manual on the accessory CD-ROM IntroductionHigh-quality digital image Main FeaturesExplanation of illustration High-speed laser copyingLaser printer function Enhanced copying featuresScan once/Print many LCD panel displays messagesInterface PreparationsPart Names Original coverAR-M200 Operation panelZoom key DisplayClear ALL key Connecting the Power Cord Auto power shut-off mode Power offPower save modes Preheat modeLoading Paper Paper tray Paper type Size Weight Capacity TypePaper Special papers Loading the Paper TrayGently push the paper tray back into the machine Envelopes Important points when inserting paper in the bypass trayOpen the bypass tray and extend the tray Loading paper in the bypass trayPress the Tray Select key to select the bypass tray Select the tray, and then press the OK Changing a Trays Paper Size SettingCopying books or originals with folds or creases Using the document glassMaking Copies Normal CopyingPress the Start key Using the RspfRemoving the document cover Document feeder trayPaper output tray extension Originals that cannot be used in the RspfOriginal output tray extension Capacity of paper output traySelecting the Tray Setting the number of copiesPress the Tray Select key Press the OK key Select the number of copies and any other copy settings,Making a Copy Darker or Lighter Original typesPress the Zoom key and/or key or key to Selecting a preset ratioFine adjustment of the ratio REDUCTION/ENLARGEMENT/ZOOMAutomatic TWO-SIDED Copying Convenient Copy FunctionsTo 2 appears, and then press the OK Place the originals in the RSPF. p.21 Until Sort appears and then press When all originals have been scanned, press the keySort Copy Place the first original. p.20 Press the E-SORT/SP.FUNC KeyIf the memory becomes full Place the originals. p.21Press the E-SORT/SP.FUNC SP Until Sort appears and then press the OK keyKey Until 2IN1 appears and then press Copying Multiple Originals Onto a Single Sheet of Paper1 copy Place the first original. p.20 Press the E-SORT/SP.FUNC SPORIG. Size Enter Place the originals. p.21 Press the E-SORT/SP.FUNC Key Using the /RSPFPlace the originals Press the E-SORT/SP.FUNC SP Creating Margins When CopyingMargin shift Document glassMargin Shift on OFF Sharpdesk Installing the SoftwareSoftware MFP driverWindows Available 98/Me/2000/XP/Vista Before InstallationInstallation environment and usable software Hardware and software requirementsUsing the machine with a USB connection Installing the SoftwareSelect Connected to this computer and click the Next button Installing the SoftwareInstalling the Software This completes the installation of the software When installing is finished, click the Close buttonConnecting a USB cable Select Connected via the network and click the Next button Using the machine as a shared printerYou will return to the window of . Click the Close button Click the Add Network Port buttonWindows XP/Vista Setting UP Button ManagerInstalling the Software Select Sharp AR-XXXX and click the Properties button Windows 98/Me/2000Select Sharp Button Manager T Send to this application PRINTER/SCANNER Functions System requirements for USB 2.0 Hi-Speed modeMake sure that paper is loaded in the tray Using the Printer ModeBasic Procedure for Printing Cancelling a print jobScanning Using the Keys on the Machine Using the Scanner ModeScanning from the operation panel of the machine Operation in COPY, PRINTER, and Scanner Modes Scanning from Your ComputerButton Manager scan menu Viewing the online manual HOW to USE the Online ManualClick to read the online manual Copy mode User SettingsUser Programs 10 mm MINOFF 300dpi50% Explanation NumberLOW Finnish Danish Hungarian Czech Polish Russian Slovak Reset FactoryLSU Setting NorwegianPrint mode Press the Menu key and then press the OK key Selecting a Setting for a User ProgramAuto Base settingsChanging password Account Control SettingsPreparing for Using Account Control Settings Entering account control modeEnabling auditing mode Entering an account number Account Number ControlDeleting an account number Changing an account number Total PER Account Resetting accountWhen the copy job is finished, press the ACC.#-C key Copying When Auditing Mode is EnabledEnter your five-digit account number with the numeric keys Indication Cause and remedy Lamp indicator Display Troubleshooting and MaintenanceDisplay Messages Cartridge is Install a NEWMaintenance For Service Memory FULL, Press Start toTroubleshooting the Machine Paper Paper misfeed Problem Cause and solution Misfeed occurPaper is outside of the specified Size and weight range Paper is not loaded properlyMemory FULL, Press Start to Click the start button and then click Control Panel Problems During Setup of the SoftwareMFP driver cannot be installed Windows 2000/XP Click Performance and Maintenance, and then click SystemClick the icon beside Universal Serial Bus controllers Plug and play screen does not appearClick Icon beside Other Devices Removing the softwareClick Add or Remove Programs Misfeed Removal Misfeed in the paper feed area Misfeed in the fusing areaSide cover open button. The error indicator will go out Ready indicator will light upMisfeed in the transport area Lower the fusing unit release leverOpen the front cover Document feeder cover Rspf jam release lever Misfeed in the RspfToner Cartridge Replacement Cartridge out while pressing the lock release lever Gently pull the tonerToner cartridge lock release lever LockUnlock Scan Head Locking SwitchChecking the Total Count Maintenance RequiredPress the key or key to display the count of each function Cabinet Cleaning the MachineDocument glass and the back side of the Rspf Transfer Charger Network Expansion KIT AR-NB2A System ConfigurationOptional Equipment Facsimile Expansion KIT AR-FX13Sheet Paper Feed Unit AR-D33 Interface cable Using the AR-D33 with the printer functionUSB interface cable Appendix SpecificationsPower consumption Fusing systemResolution Power supplyEmulation Printer FunctionPrint speed MemoryNetwork Expansion kit AR-NB2A Scanner FunctionSheet paper feed unit AR-D33 Reversing Single Pass Feeder AR-RP9Facsimile expansion kit AR-FX13 SORT/SP.FUNC SP SymbolsIndex Sided ScanOriginal output tray extension Original guides Toner cartridge lock release lever Preparations Using convenient copy functionsConnecting the computer Troubleshooting and maintenanceMaterial Safety Data Sheet Hazards Identification Exposure Controls / Personal Protection Transport Information Supplier Identification Hazards Identification Exposure Controls / Personal Protection Ecological Information Other Countries outside the EU Mains Plug Wiring Instructions Class Laser Product Laser Klasse Sharp Manufacturing France S.A