Sharp AR-M200 operation manual Paper

TROUBLESHOOTING AND MAINTENANCE

Problem	Cause and solution	Page
	The original was not placed in the
	correct position.	20, 21
	→ Place the original correctly.
	An appropriate ratio was not used for
	the size of the original and the size of
	the paper.	25
Part of the image is cut	→ Press the [ZOOM] key to change the
off or there is too much	ratio to a setting that is suitable for the
blank space.	original and the copy paper.
	The size of paper loaded in the tray was
	changed without changing the tray's
	paper size setting.	19
	→ Be sure to change the tray's paper size
	setting whenever you change the size
	of paper loaded in the tray.
	The paper is outside of the specified
	size and weight range.	14
	→ Use copy paper within the specified
	range.
Wrinkles appear in the
	Paper curled or damp.
paper or the image	→ Do not use curled or crimped paper.
disappears in places.	Replace with dry copy paper. During	-
	periods when the machine is not used
	for a long time, remove the paper from
	the tray and store it in a dark place in a
	bag to prevent moisture absorption.
	The document glass or the underside of
Copies are smudged or	the RSPF is dirty.	84
	→ Clean regularly.
dirty.
	Original smudged or blotchy.	-
	→ Use a clean original.
	The fusing temperature is not
Images rub off the copy	appropriate.
	→ In the user programs, set "PAPER	57
easily.
	TYPE" (program 29) to "2 (HEAVY
	PAPER)".
Printing is not uniform	The fusing temperature is not
	appropriate.
between the edges of
	→ In the user programs, set "PAPER	57
the paper and the
	TYPE" (program 29) to "1 (PLAIN
center.
	PAPER)".

70