Sharp AR-M200 operation manual Min, Off, 300dpi, 10 mm

			USER SETTINGS
Program		Setting codes
	Program name	(factory default	Explanation
number		setting appears
		in bold)

• This function automatically switches the machine to a state that consumes even less power than preheat mode if the set duration of time elapses without the machine being used when the

		1: 5 MIN.	power is on. All lights except the
	AUTO SHUT-OFF	2: 30 MIN.	power save indicator	go off. To
4		3: 60 MIN.	resume normal operation, press
	TIME
		4: 120 MIN.	the [START] key (	). Normal
		5: 240 MIN.	operation also resumes
			automatically when a print job is
			received or scanning is begun
			from a computer. While in auto
			power shut-off mode, no keys
			(except the [START] key (		))
			can be used.
			• Use this setting to select the
		1: PATTERN 1	layout pattern when two original
7	LAYOUT IN 2IN1		pages are copied onto a single
		2: PATTERN 2
			sheet of paper (see page 31 for
			the layout patterns).
			• When enabled, this function
	OFFSET	1: ON	offsets the position in the paper
8			output tray of sets of copies
	FUNCTION	2: OFF
			during copy job, and print jobs
			when using the printer function.
			• When two-sided copying is
	ROTATE ORIG.		performed, this function rotates
9		1: ON	the image on the back of the
	IMAGE	2: OFF	original. This is convenient
			when binding the copies at the
			top (tablet binding).
			• This setting is used to change
			the copy resolution in AUTO
	AE/TEXT	1: 300dpi	and TEXT mode from 600 x 300
10			dpi to 600 x 600 dpi (high-
	RESOLUTION	2: 600dpi
			quality mode). Scanning is
			slower when high-quality mode
			is used.
			• If the memory fills up when two-
			sided copying is performed,
			"NORMAL" can be selected to
	2-SIDED COPY	1: HI-SPEED	make copying possible.
11			However, "NORMAL" results in
	MODE	2: NORMAL
			a slower copying speed.
			Normally "HI-SPEED" is
			selected to enable fast two-
			sided copying.
		1: 5 mm
12	MARGIN WIDTH	2: 10 mm	• Use this setting to set the
		3: 15 mm	margin width.
		4: 20 mm

7

55