Sharp AR-M200 operation manual Using the document glass, To 2 appears, and then press the OK

CONVENIENT COPY FUNCTIONS

Using the document glass

1

2

Place the original that you wish to copy onto the front side of the paper on the document glass and close the document cover/RSPF.

Press the [2-SIDED COPY (	)] key until	2-SIDED	COPY
"1 TO 2" appears, and then press the [OK]
		1 TO 2
key.			OK

1,2,3,	ZOOM
SP. FUNC
1,2,3,

3

Press the [] key () or [] key () to select the binding edge and then press the [OK] key.

Select "LONG EDGE" or "SHORT EDGE". The "LONG EDGE" and "SHORT EDGE" are shown in the illustration on the preceding page.

BINDING EDGE

LONG EDGE

	OK
1,2,3,	ZOOM
SP. FUNC
1,2,3,

4

Select the number of copies and any other settings, and then	4
press the [START] key ( ).

"[START] : NEXT SCAN [#] : START PRINT" appears and the original is scanned into memory.

To immediately print the scanned image, press the [ ] key.

5 Replace the original with the next

original and close the RSPF, and
then press the [START] key ( ).
Repeat step 5 until all originals have been
scanned.	1	2
Copies will be output each time two originals
have been scanned.
When the number of original pages is odd	The first original	The second original

and "[START] : NEXT SCAN [#] : START

PRINT" appears, press the [ ] key after all pages have been scanned.

• If you need to clear the data scanned into memory, press the

Note [CLEAR] key (). When the [CLEAR] key () is pressed, the number of copies setting is also cleared.

•To cancel automatic two-sided copying, press the [CLEAR ALL] key

() or press the [2-SIDED COPY ()] key, select the "1 TO 1", and then press the [OK] key.

•If the special function sort mode was selected in step 4, copying will not begin until the [ ] key is pressed.

27