Sharp AR-M200 operation manual User Settings, User Programs, Copy mode

7

Chapter 7

USER SETTINGS

The user settings allow you to customize machine settings to better meet your needs.

USER PROGRAMS

The user settings consist of the following items.

To change the user program settings as explained in "SELECTING A SETTING FOR A USER PROGRAM" (p.59).

Copy mode

Program		Setting codes
	Program name	(factory default		Explanation
number		setting appears
		in bold)
			•	Auto clear time automatically
		1: 10 SEC.		returns the copy settings to
				the initial settings (p.12) if no
		2: 30 SEC.		keys are pressed for a preset
1	AUTO CLEAR	3: 60 SEC.		period of time following the
		4: 90 SEC.
				end of a copy job.
		5: 120 SEC.
		6: OFF	•	This program is used to select
				the period of time. Auto clear
				time can also be disabled.
			•	This function automatically
				switches the machine to a low
				power consumption state if
		1: 30 SEC.		the set duration of time
				elapses without the machine
		2: 1 MIN.		being used when the power is
		3: 5 MIN.		on. The power save indicator
2	PREHEAT MODE	4: 30 MIN.
				lights up, however, the keys
		5: 60 MIN.
				on the operation panel can be
		6: 120 MIN.
		7: 240 MIN.		used. Normal operation
				automatically resumes when
				a key on the operation panel
				is pressed, an original is
				placed, a print job is received.
		1: ON	•	Use this setting to enable or
3	AUTO SHUT-OFF			disable auto power shut-off
		2: OFF
				mode.

54