TANDBERG ENTRYPOINT manual Configuring Your Entrypoint via the RS 232, About Gateway Configuration

Page 14

Configuring Your Entrypoint via the RS 232

TANDBERG ENTRYPOINT USER GUIDE

About Gateway Configuration

The Entrypoint requires some basic configurations before it can be used. It will be necessary to find the IP-address and to create the dial-in and dial-out services to program the ISDN-PRI Line numbers.

Configuring via the RS 232

Make sure the Entrypoint is Off and

Switch on the Entrypoint.

Start a terminal program on the PC and

connect an RS232 cable between the

 

configure it to:

Entrypoint and a PC.

 

 

115200, 8, 1, None

 

 

 

 

 

 

Power switch

Configuration via the Front Panel

As an alternative to the configuration via RS 232 you may use the LCD panel to configure and check the IP settings, as well as to reboot the system. This is outlined on the next page.

To assign a static IP-address, type

Xconf ip Assigment: “Static” and

Xconf ip address <IPAddr>

To assign an IP Subnetmask, type Xconf ip address subnetmask <subnetmask>

Restart the Entrypoint.

Start a WEB browser

 

and enter the

 

IP-address of the

 

Entrypoint. Default

 

password: TANDBERG

 

Note the case sensitivity!

To configure the Entrypoint for UMTS dial-in, enter PRI or BRI numbers and dial in number(s). For details, see Configuring the Entrypoint.

To assign an IP Gateway address, type Xconf ip address gateway <gateway IP-address>

To configure the Entrypoint for IP dial in, register the Entrypoint to a Gatekeeper and enter H.323 services. For details, see Configuring the Entrypoint

Table of

 

Trademarks

&

Patents &

 

Safety/

To

Get You

Using the

Viewing the

 

Configuring

 

Maintenance

 

Services

 

Dial Plan

 

Contact

Contents

 

Copyright

 

Disclaimers

 

Environmental

Upup

and Going

Entrypoint

System Status

the

Entrypoint

&

Upgrade

 

 

Examples

 

Information

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

14

 

 

 

 

 

 

 

 

 

 

 

D 14050.04

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

10.2007

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Guide Maintenance and Upgrade Operator Safety / Environmental IssuesUsing the Entrypoint ServicesTrademarks and Copyright Copyright 2007, TandbergDisclaimers Disclaimer, License Agreements, and Patent InformationPatents Disclaimer License Agreements Patent Information Operator Safety / Environmental Issues SafetySafety Instructions Environmental Issues Tandberg Entrypoint Going To get You Up and GoingGet You Unpacking and Installation Connecting the CablesEntrypoint Capacity Typical Scenarios Entrypoint Features at a GlanceAbout the Entrypoint Features Highlights Front and Rear Panels IndicatorDepending on the configuration ordered Entrypoint Start-upConfiguring via the RS 232 Configuring Your Entrypoint via the RS 232About Gateway Configuration Configuration via the Front PanelConfiguration via RS 232 Configuring the IP Address via the Front PanelConfiguring via the Front Panel Switching On the UnitUsing the Entrypoint User name is admin Accessing the EntrypointForgot the Password? Starting Up the EntrypointRemote Number. This is the inbound number An Overview of the Management Menu SystemOverview Window Management MenuWhen View Details Has Been Selected Service Call DetailsAbout Service Call Details Did Direct Inward Dialling Call Setup via Default ServicesAbout Default Services Dial Extension IVR ExampleAbout TMS Corporate Directory Dialling from Umts Using Phone BookExample of IVR Using the Phone Book Viewing the System Status ViewingISDN/PRI Status PRI Versions only About the Rear Panel LED OperationISDN/BRI Status BRI Versions only Registration Status Inactive Gatekeeper StatusAbout H.323 Status Registration Status Registered Registration Status RejectedServices IVRSystem Information System Resources Configuring the Entrypoint ConfiguringPrefix on National/International Numbers ISDN/PRI Configuration ISDN/PRI Versions onlyOutgoing Bearer capability ISDN/BRI Configuration ISDN/BRI Versions only IP Address Assignment is Dhcp or Static IP ConfigurationDNS Interface Authentication Mode is Off or Auto ConfigurationConfiguration pane SIP Configuration SIP settingsSnmp Configuration Save. Press Save to activate new settingsSystem Upgrade Maintenance and UpgradeMaintenance Maintenance General For dot-release upgrades a Release Key won’t be neededMaintenance Upgrading the System Upgrading the SystemAdd Option key Key. Shows Maintenance Option Keys, Password and RestartOption Keys Password Restart Press Add OptionServices Configuration menu from the Service tab Default ServicesAbout Default Services Service Configuration Window Dialplan Configuration ExampleUnder Arguments Argument Details for the Default did ServiceDid Argument Details Allow forwarding. After callShow Dtmf Information Screen. This is a Argument Details for a Default IVR ServiceIVR Argument Details Argument Details for a Default Menu Service Menu Service Argument DetailsTMS Corporate Directory Argument Details Show Dtmf Information Screen. Identical toExamples Dial Plan ExamplesDial Plan Example 1 Number-plan mapping Some Dial Plan ExamplesAbout the Examples Prefix See note belowExample 6 3G to SIP IVR Dial Extension IVR ExamplesDial Extension IVR Dial Plan Examples Secretary Service Forwarding and Use Remainder to On for aTMS Corporate Directory Contact Information Contact
Top Page Image Contents