Starting Up the Entrypoint
TANDBERG ENTRYPOINT USER GUIDE
Entrypoint Start-up
To start the Entrypoint, simply connect the power cable, and set the power switch button (both at the rear) to position I.
Power switch
On the front panel of the system the power indicator LED, marked Pwr, will turn GREEN.
Accessing the Entrypoint
You may access the Entrypoint by entering the
enter a password. You will need to enter admin as user name. The default
password for the Entrypoint is TANDBERG. Remember that the password is case sensitive. Note that you may also use SSH and Telnet to configure the Entrypoint.
User name is admin
PASSWORD. Default password is TANDBERG (NB! case sensitive)
Forgot the Password?
Reboot the Entrypoint.
Connect to the Entrypoint via the serial interface once it has restarted.
Login with User Name pwrec. No password is required.
You will be prompted for a new password.
The pwrec account is active for one minute following a restart. Beyond that time, the system will have to be restarted to change the password.
Table of |
| Trademarks | & | Patents & |
| Safety/ | To | Get You |
| Using the | Viewing the |
| Configuring |
| Maintenance |
| Services |
| Dial Plan |
| Contact | |
Contents |
| Copyright |
| Disclaimers |
| Environmental | Up | and Going |
| Entrypoint | System Status | the | Entrypoint | & | Upgrade |
|
| Examples |
| Information | ||
|
|
|
|
|
|
|
| |||||||||||||||
|
|
|
|
|
|
|
|
|
|
| 17 |
|
|
|
|
|
|
|
|
|
|
|
D 14050.04 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
10.2007 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |