TANDBERG ENTRYPOINT manual Gatekeeper Status, About H.323 Status Registration Status Registered

Page 25

H.323 Gatekeeper Status

TANDBERG ENTRYPOINT USER GUIDE

About H.323 Status

Registration Status Registered

H.323 Gatekeeper Status shows the current status of the Gatekeeper registration. To view H.323 gatekeeper status, as indicated in the screenshot shown here, select H.323 Status item of the Status tab.

Registration Status. If Registered, the Entrypoint is registered to the Gatekeeper with below mentioned Address and Port.

IP Address. Shows the IP address of the Gatekeeper.

Port. Shows the destination port number on the Gatekeeper.

Note that, since this

target system is not

an endpoint it is not possible to use its IP

address to place calls to or through the Entrypoint!

Registration Status Inactive

In case the Entrypoint is in direct mode or in case the gatekeeper IP address is filled in incorrectly, the Entrypoint will not be registered with the Gatekeeper, and the Registration status is stated as Inactive.

Registration Status Rejected

Registration status will show Rejected when:

Gatekeeper unreachable; the Entrypoint’s H.323 stack returns this reject message in case the gatekeeper is down.

Duplicate alias; a system with an identical name has already been registered.

Authentication failure; Authentication ID and/or Authentication Password are incorrect.

Table of

 

Trademarks

&

Patents &

 

Safety/

To

Get You

 

Using the

Viewing the

Configuring

 

Maintenance

 

Services

 

Dial Plan

 

Contact

Contents

 

Copyright

 

Disclaimers

 

Environmental

Up

and Going

 

Entrypoint

System Status

the Entrypoint

&

Upgrade

 

 

Examples

 

Information

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

25

 

 

 

 

 

 

 

 

 

 

D 14050.04

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

10.2007

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Image 25
Contents Guide Using the Entrypoint Operator Safety / Environmental IssuesMaintenance and Upgrade ServicesCopyright 2007, Tandberg Trademarks and CopyrightPatents Disclaimer, License Agreements, and Patent InformationDisclaimers Disclaimer License Agreements Patent Information Safety Operator Safety / Environmental IssuesSafety Instructions Environmental Issues Tandberg Entrypoint Get You To get You Up and GoingGoing Connecting the Cables Unpacking and InstallationAbout the Entrypoint Features Highlights Entrypoint Features at a GlanceEntrypoint Capacity Typical Scenarios Depending on the configuration ordered IndicatorFront and Rear Panels Entrypoint Start-upAbout Gateway Configuration Configuring Your Entrypoint via the RS 232Configuring via the RS 232 Configuration via the Front PanelConfiguring via the Front Panel Configuring the IP Address via the Front PanelConfiguration via RS 232 Switching On the UnitUsing the Entrypoint Forgot the Password? Accessing the EntrypointUser name is admin Starting Up the EntrypointOverview Window An Overview of the Management Menu SystemRemote Number. This is the inbound number Management MenuAbout Service Call Details Service Call DetailsWhen View Details Has Been Selected About Default Services Call Setup via Default ServicesDid Direct Inward Dialling Dial Extension IVR ExampleExample of IVR Using the Phone Book Dialling from Umts Using Phone BookAbout TMS Corporate Directory Viewing Viewing the System StatusAbout the Rear Panel LED Operation ISDN/PRI Status PRI Versions onlyISDN/BRI Status BRI Versions only About H.323 Status Registration Status Registered Gatekeeper StatusRegistration Status Inactive Registration Status RejectedIVR ServicesSystem Information System Resources Configuring Configuring the EntrypointOutgoing Bearer capability ISDN/PRI Configuration ISDN/PRI Versions onlyPrefix on National/International Numbers ISDN/BRI Configuration ISDN/BRI Versions only DNS Interface IP ConfigurationIP Address Assignment is Dhcp or Static Configuration pane ConfigurationAuthentication Mode is Off or Auto SIP settings SIP ConfigurationSave. Press Save to activate new settings Snmp ConfigurationSystem Maintenance Maintenance and UpgradeUpgrade For dot-release upgrades a Release Key won’t be needed Maintenance GeneralUpgrading the System Maintenance Upgrading the SystemOption Keys Password Restart Maintenance Option Keys, Password and RestartAdd Option key Key. Shows Press Add OptionServices About Default Services Service Configuration Window Default ServicesConfiguration menu from the Service tab Example Dialplan ConfigurationDid Argument Details Argument Details for the Default did ServiceUnder Arguments Allow forwarding. After callIVR Argument Details Argument Details for a Default IVR ServiceShow Dtmf Information Screen. This is a Menu Service Argument Details Argument Details for a Default Menu ServiceShow Dtmf Information Screen. Identical to TMS Corporate Directory Argument DetailsDial Plan Dial Plan ExamplesExamples About the Examples Some Dial Plan ExamplesExample 1 Number-plan mapping Prefix See note belowDial Extension IVR Dial Plan Examples Dial Extension IVR ExamplesExample 6 3G to SIP IVR Forwarding and Use Remainder to On for a Secretary ServiceTMS Corporate Directory Contact Contact Information