TANDBERG ENTRYPOINT manual Configuration pane, Authentication Mode is Off or Auto

Page 33

H.323 Configuration

TANDBERG ENTRYPOINT USER GUIDE

Select H.323 to access the

H.323 Configuration pane.

When registered with

a gatekeeper, the H.323 Status shows

Registered, the gatekeeper’s IP address and the Port used (see also Status, H.323 Status).

Dialling out from IP to

IP or ISDN, through the Entrypoint,

requires the use of H.323 numbers (E.164 aliases and service prefixes). This means that the Entrypoint must be registered to a gatekeeper; select the H.323 menu item in the Configuration menu.

Save. When ready to store the new settings, press Save.

In case password is not set/configured/inserted, the Entrypoint will still

use the Authentication ID to register with the gatekeeper. However, when the Authentica- tion ID is left “unused”, the System Name field. will be used to register the Entrypoint with the gatekeeper instead. In case both the Authentication ID field and the System Name field are “unused” the Entrypoint can not be registered with the gatekeeper.

Table of

Trademarks

&

Patents &

Safety/

To

Get You

Using the

Viewing the

 

Configuring

Contents

Copyright

 

Disclaimers

Environmental

Up

and Going

Entrypoint

System Status

the

Entrypoint

 

 

 

 

 

 

 

 

33

 

 

 

D 14050.04

 

 

 

 

 

 

 

 

 

 

10.2007

 

 

 

 

 

 

 

 

 

 

Mode. Enables the Entrypoint to register with a gatekeeper or leave it unregistered, i.e. in direct mode. Make sure that System Name is always set in direct mode. When registered with a gatekeeper, the H.323 Status shows Registered, the gatekeeper’s IP address and the Port used.

When the registration fails, the Registration status will be rejected. Three cases can be distinguished:

•Gatekeeper unreachable; the Entrypoint’s H.323 stack returns this reject message in case the gatekeeper is down.

•Duplicate alias; a system with an identical name has already been registered.

•Authentication failure; Authentication ID and/or Authentication Password are incorrect.

Selecting direct mode will result in no gatekeeper registration; hence it is not possible to dial through the Entrypoint via alias names. The H.323 Status shows Inactive.

IP Address. Enter the Gatekeeper IP address that the Entrypoint should register to. Leaving this empty will result in direct dialling without the use of aliases.

Authentication Mode is Off or Auto.

•Off. Register to the Gatekeeper without authentication.

•Auto. Register to the Gatekeeper with H.235 authentication using ID/Password given below.

Authentication ID and Password. Enter the ID and pass- word required to perform H.235 authentication at the Gatekeeper. To register with a Gatekeeper that requires authentication, an NTP server has to be configured.

If the Gatekeeper is configured with an alternative Gatekeeper, the Status area may report a registration to the IP address

of the alternative Gatekeeper.

 

 

 

 

 

 

 

 

Maintenance

Services

 

Dial Plan

 

Contact

& Upgrade

 

Examples

 

Information

 

 

 

 

 

 

 

 

 

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Guide Using the Entrypoint Operator Safety / Environmental IssuesMaintenance and Upgrade ServicesCopyright 2007, Tandberg Trademarks and CopyrightDisclaimer, License Agreements, and Patent Information PatentsDisclaimers Disclaimer License Agreements Patent Information Safety Operator Safety / Environmental IssuesSafety Instructions Environmental Issues Tandberg Entrypoint To get You Up and Going Get YouGoing Connecting the Cables Unpacking and InstallationEntrypoint Features at a Glance About the Entrypoint Features HighlightsEntrypoint Capacity Typical Scenarios Depending on the configuration ordered IndicatorFront and Rear Panels Entrypoint Start-upAbout Gateway Configuration Configuring Your Entrypoint via the RS 232Configuring via the RS 232 Configuration via the Front PanelConfiguring via the Front Panel Configuring the IP Address via the Front PanelConfiguration via RS 232 Switching On the UnitUsing the Entrypoint Forgot the Password? Accessing the EntrypointUser name is admin Starting Up the EntrypointOverview Window An Overview of the Management Menu SystemRemote Number. This is the inbound number Management MenuService Call Details About Service Call DetailsWhen View Details Has Been Selected About Default Services Call Setup via Default ServicesDid Direct Inward Dialling Dial Extension IVR ExampleDialling from Umts Using Phone Book Example of IVR Using the Phone BookAbout TMS Corporate Directory Viewing Viewing the System StatusAbout the Rear Panel LED Operation ISDN/PRI Status PRI Versions onlyISDN/BRI Status BRI Versions only About H.323 Status Registration Status Registered Gatekeeper StatusRegistration Status Inactive Registration Status RejectedIVR ServicesSystem Information System Resources Configuring Configuring the EntrypointISDN/PRI Configuration ISDN/PRI Versions only Outgoing Bearer capabilityPrefix on National/International Numbers ISDN/BRI Configuration ISDN/BRI Versions only IP Configuration DNS InterfaceIP Address Assignment is Dhcp or Static Configuration Configuration paneAuthentication Mode is Off or Auto SIP settings SIP ConfigurationSave. Press Save to activate new settings Snmp ConfigurationSystem Maintenance and Upgrade MaintenanceUpgrade For dot-release upgrades a Release Key won’t be needed Maintenance GeneralUpgrading the System Maintenance Upgrading the SystemOption Keys Password Restart Maintenance Option Keys, Password and RestartAdd Option key Key. Shows Press Add OptionServices Default Services About Default Services Service Configuration WindowConfiguration menu from the Service tab Example Dialplan ConfigurationDid Argument Details Argument Details for the Default did ServiceUnder Arguments Allow forwarding. After callArgument Details for a Default IVR Service IVR Argument DetailsShow Dtmf Information Screen. This is a Menu Service Argument Details Argument Details for a Default Menu ServiceShow Dtmf Information Screen. Identical to TMS Corporate Directory Argument DetailsDial Plan Examples Dial PlanExamples About the Examples Some Dial Plan ExamplesExample 1 Number-plan mapping Prefix See note belowDial Extension IVR Examples Dial Extension IVR Dial Plan ExamplesExample 6 3G to SIP IVR Forwarding and Use Remainder to On for a Secretary ServiceTMS Corporate Directory Contact Contact Information
Top Page Image Contents