TANDBERG ENTRYPOINT IP Configuration, DNS Interface, IP Address Assignment is Dhcp or Static

Page 32

IP Configuration

TANDBERG ENTRYPOINT USER GUIDE

Select IP from the Configuration to access the IP Configuration pane.

DNS Interface

Up to five Domain Name Server IP addresses can be specified here. Your LAN administrator will provide the correct values for these fields. By default these fields are set to 127.0.0.1

Date and Time Settings. An NTP server address can be specified here to provide the Entrypoint with up-to-date time and date information.

Save. When ready to store the new settings, press Save. These settings will take effect when the system has been restarted.

Restart. This button will restart the Entrypoint. Any changes made in the IP Configuration of the Entrypoint will take effect after the system has been restarted.

IP Address Assignment is DHCP or Static:

•DHCP: Dynamic Host Configuration Protocol can be selected when a DHCP server

is present. Static IP Address, Static IP Subnet Mask and Static IP Gateway are ignored because these parameters are assigned by the DHCP server.

•Static: If Static assignment is used, the Entrypoint’s IP address, IP subnet mask, and the Gateway’s IP address must be specified in the respective IP address fields.

IP Ethernet Speed provides five settings to choose from:

•Auto The Gateway will negotiate detect the speed and duplex on the LAN.

•10Half The Gateway will connect to the LAN using 10 Mbps/Half Duplex.

•10Full The Gateway will connect to the LAN using 10 Mbps/Full Duplex.

•100Half The Gateway will connect to the LAN using 100 Mbps/Half Duplex.

•100Full The Gateway will connect to the LAN using 100 Mbps/Full Duplex.

IP Address. The Static IP Address defines the network address of the Entrypoint. This address is only used in static mode. Your LAN administrator will provide you with the correct address for this field.

IP Subnet Mask. The Static IP Subnet Mask defines the type of network. Your LAN administrator will provide the correct value for this field.

IP Gateway. The Static Gateway IP address is set to 127.0.0.1 by default. In case of a router enter its address here. Your LAN administrator will provide the correct value for this field.

Table of

 

Trademarks

&

Patents &

 

Safety/

To

Get You

 

Using the

Viewing the

 

Configuring

Maintenance

 

Services

 

Dial Plan

 

Contact

Contents

 

Copyright

 

Disclaimers

 

Environmental

Up

and Going

 

Entrypoint

System Status

the

Entrypoint

& Upgrade

 

 

Examples

 

Information

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

32

 

 

 

 

 

 

 

 

 

 

D 14050.04

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

10.2007

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Guide Operator Safety / Environmental Issues Using the EntrypointMaintenance and Upgrade ServicesTrademarks and Copyright Copyright 2007, TandbergDisclaimers Disclaimer, License Agreements, and Patent InformationPatents Disclaimer License Agreements Patent Information Operator Safety / Environmental Issues SafetySafety Instructions Environmental Issues Tandberg Entrypoint Going To get You Up and GoingGet You Unpacking and Installation Connecting the CablesEntrypoint Capacity Typical Scenarios Entrypoint Features at a GlanceAbout the Entrypoint Features Highlights Indicator Depending on the configuration orderedFront and Rear Panels Entrypoint Start-upConfiguring Your Entrypoint via the RS 232 About Gateway ConfigurationConfiguring via the RS 232 Configuration via the Front PanelConfiguring the IP Address via the Front Panel Configuring via the Front PanelConfiguration via RS 232 Switching On the UnitUsing the Entrypoint Accessing the Entrypoint Forgot the Password?User name is admin Starting Up the EntrypointAn Overview of the Management Menu System Overview WindowRemote Number. This is the inbound number Management MenuWhen View Details Has Been Selected Service Call DetailsAbout Service Call Details Call Setup via Default Services About Default ServicesDid Direct Inward Dialling Dial Extension IVR ExampleAbout TMS Corporate Directory Dialling from Umts Using Phone BookExample of IVR Using the Phone Book Viewing the System Status ViewingISDN/PRI Status PRI Versions only About the Rear Panel LED OperationISDN/BRI Status BRI Versions only Gatekeeper Status About H.323 Status Registration Status RegisteredRegistration Status Inactive Registration Status RejectedServices IVRSystem Information System Resources Configuring the Entrypoint ConfiguringPrefix on National/International Numbers ISDN/PRI Configuration ISDN/PRI Versions onlyOutgoing Bearer capability ISDN/BRI Configuration ISDN/BRI Versions only IP Address Assignment is Dhcp or Static IP ConfigurationDNS Interface Authentication Mode is Off or Auto ConfigurationConfiguration pane SIP Configuration SIP settingsSnmp Configuration Save. Press Save to activate new settingsSystem Upgrade Maintenance and UpgradeMaintenance Maintenance General For dot-release upgrades a Release Key won’t be neededMaintenance Upgrading the System Upgrading the SystemMaintenance Option Keys, Password and Restart Option Keys Password RestartAdd Option key Key. Shows Press Add OptionServices Configuration menu from the Service tab Default ServicesAbout Default Services Service Configuration Window Dialplan Configuration ExampleArgument Details for the Default did Service Did Argument DetailsUnder Arguments Allow forwarding. After callShow Dtmf Information Screen. This is a Argument Details for a Default IVR ServiceIVR Argument Details Argument Details for a Default Menu Service Menu Service Argument DetailsTMS Corporate Directory Argument Details Show Dtmf Information Screen. Identical toExamples Dial Plan ExamplesDial Plan Some Dial Plan Examples About the ExamplesExample 1 Number-plan mapping Prefix See note belowExample 6 3G to SIP IVR Dial Extension IVR ExamplesDial Extension IVR Dial Plan Examples Secretary Service Forwarding and Use Remainder to On for aTMS Corporate Directory Contact Information Contact
Top Page Image Contents