Paxar Monarch 415 manual Supply Removal

Page 23

5. Burster Option Setup and Operation

Supply Removal

1.Remove the core lock (metal strip).

2.Remove the flanged collar assembly.

3.Remove the outside core and roll of labels.

4.Remove the second separator disk.

5.Remove the middle core and roll of labels.

6.Remove the inside separator disk.

7.Unlock the inside core.

8.Remove the inside core and roll of labels

19

Image 23
Contents Operator’s Handbook Trademarks Table of Contents Monarch 415 Rewind Operator’s Handbook Setting Up Fuse Holder Power Switch Cord Rewinding on the Hub Connecting SuppliesMonarch 415 Rewind Operator’s Handbook Rewinding on a Paper Core Monarch 415 Rewind Operator’s Handbook Starting Operating the RewindStopping Changing Hubs Hub Spindles End Extension Shaft Knob Burster Option Setup and Operation Separator Bars Label Edge Slot Label Edge Slot First Separator Disk Core Lock Second Separator Disk Notch Third Core Core Lock Label Edge Second Separator Disk Slot Opening Collar Label Edges Separator Bars Supply Removal Monarch 415 Rewind Operator’s Handbook Specifications Specifications and SuppliesProblem Corrective Action TroubleshootingAppendix a Rewind Alignment Toll Free