Paxar Monarch 415 manual Rewinding on a Paper Core

Page 9

2. Connecting Supplies

Rewinding on a Paper Core

1.Slide the supply guide away from the hub flange and pull it away from the hub.

2.Push the paper core on the hub until it is against the hub flange.

3.Hold the hub flange and twist the hub clockwise until the paper core is tight.

4.Tape the supply strip to the paper core (Figure 5). Be sure the supply is against the hub flange.

Hub

Flange

Tape

Supply

Strip

Paper

Core Hub

Figure 5

5

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Operator’s Handbook Trademarks Table of Contents Monarch 415 Rewind Operator’s Handbook Setting Up Fuse Holder Power Switch Cord Rewinding on the Hub Connecting SuppliesMonarch 415 Rewind Operator’s Handbook Rewinding on a Paper Core Monarch 415 Rewind Operator’s Handbook Starting Operating the RewindStopping Changing Hubs Hub Spindles End Extension Shaft Knob Burster Option Setup and Operation Separator Bars Label Edge Slot Label Edge Slot First Separator Disk Core Lock Second Separator Disk Notch Third Core Core Lock Label Edge Second Separator Disk Slot Opening Collar Label Edges Separator Bars Supply Removal Monarch 415 Rewind Operator’s Handbook Specifications Specifications and SuppliesProblem Corrective Action TroubleshootingAppendix a Rewind Alignment Toll Free
Top Page Image Contents