EX500 Part Names
No. | Name | Application |
1 | Communication | Connect with EtherNet/IP line. ( Note 1 ) |
| connector |
|
|
|
|
2 | Power supply connector | Supply power for output devices such as solenoid |
|
| valve, for input devices such as sensor, and for |
|
| controlling GW/SI by using power supply connector |
|
| cable. ( Note1 ) |
|
|
|
3 | Communication port A |
|
| ( COM A ) |
|
|
|
|
4 | Communication port B |
|
Dimensions ( unit : mm )
EX500 body
148
|
|
| GATEWAY UNIT | PE | EX500 |
LAN | PWR |
| EX500 SERIES | ||
| LINK |
|
|
| - |
|
|
|
| 12 63 73 88 | G |
| 100 |
|
| EN1 | |
| MS |
|
|
|
|
| NS |
|
|
|
|
24VDC | COM A | COM B | COM C | COM D |
|
160
136
46 | 48.8 |
10
Installation ( unit : mm )
Thread mounting
Secure at four positions with screws with head diameter of 5.2 or more and thread
| ( COM B ) | Connect SI unit ( manifold valve ) or Input unit by |
|
| |
5 | Communication port C | using branch cable with M12 connectors. ( Note1 ) |
| ||
| ( COM C ) |
|
|
|
|
6 | Communication port D |
|
| ( COM D ) |
|
|
|
|
7 | Display | Display the power supply status and communication |
|
| status with PLC. ( Note2 ) |
length of 15mm or more.
4
M5
Tightening torque : (1.5 
0.2) N 
m
148
68 5
8 Station number switch | Set IP address and communication method by using |
protective cover | the switches under this cover. ( Note2 ) |
Note1 : For wiring method, refer to subsection "Wiring" ( page 11 ) of section "EX500" in this manual.
Note2 : For display and setting method, refer to subsection "Display/Switch Setting" ( page 18 ) of section "EX500" in this manual.
Cutout Dimensions for Mounting ( Tolerance : 
0.2 )
6 | 7 |