Orion Car Audio 1892 1335 manual Option Choice Links, Using the GUI

Links can be closed with a solder blob as shown in Figure 10 to select these options:

Option	Choice	Links
Protocol	RS232	LK1 open
	RS422/RS485	LK1 closed
Duplex	Full duplex	LK2 open
	Half duplex	LK2 closed
In/Out mode	Full I/O + modem	LK5 open
	Modem only	LK5 closed
Use of	Analogue user	LK3 open, LK4 closed, LK6	For GMAX radios,
Analogue Out 0	output	1-2 open	LK6 2-3 closed.
			Power level is
	RSSI output	LK3 closed, LK4 open, LK6	preset HI or LO.
			For other radios,
		1-2 open
			don’t care.
	Variable power	LK3 open, LK4 open, LK6 1-2 closed, LK6 2-3
	control (GMAX	open
	radios only)

Using the GUI

Ensure that the serial comms port of the PC which is used to run the GUI program is connected to the Orion using a suitable cable as described on page 9. The type of cable depends on whether your Orion’s serial port uses RS232, RS422 or RS485.

vNote that this is NOT a standard serial cable, which must not be used. The GUI must have been installed on the PC as described on page 9.

Switch on power to the Orion.

Start the GUI, typically by double-clicking the icon on the desktop, or selecting Start, Programs, Wood & Douglas, Orion GUI. You should see a display similar to the following, depending on whether you are currently able to connect to an Orion and what options are in force:

1892 1335 - Orion Radio Modem Operating Instructions - v1.3 / Aug 2006 11