Omega OME-PIO-D144 manual Daughter Boards, OME-DB-37, OME-DN-37 & OME-DN-50, OME-DB-8125

Page 15

2.6Daughter Boards

2.6.1OME-DB-37

The OME-DB-37 is a general purpose daughter board with D-sub 37 pin connector. It is designed for easy wire connection.

37-PIN cable

OME-DB-37

2.6.2OME-DN-37 & OME-DN-50

The OME-DN-37 is a general purpose daughter board for D-sub 37 pin connector. The OME-DN-50 is designed for 50-pin flat-cable header. They are designed for easy wire connection. Both boards are DIN rail mountable.

37-PIN cable

OME-DN-37

2.6.3OME-DB-8125

The OME-DB-8125 is a general purpose screw terminal board. It is designed for easy wire connection. There is one D-Sub37 & two 20-pin flat-cable headers on the OME- DB-8125.

37pin cable

OME-DB-8125 (D-Sub37 or

20-pin flat-cable header)

OME-PIO-D144 User’s Manual (Ver.2.1, Sep/2001)

----- 13

Image 15

Contents User’sGuide Czech Republic CanadaMexico BeneluxOME-PIO-D144 Table of Contents Demo Program Specifications All signals are TTL compatibleProduct Check List Board Layout Hardware configurationEnable I/O Operation I/O Port LocationRefer to DEMO1.C for demo program O Architecture If INT signal is Low now Æ select the non-inverted input Interrupt OperationMake sure the initial level is High or Low Refer to DEMO3.C for source code Refer to DEMO4.C for source code CN1PC0 CN1PC1 CN1PC2 CN1PC3 If PC1 is active OME-DB-8125 Daughter BoardsOME-DB-37 OME-DN-37 & OME-DN-50OME-ADP-37/PCI & OME-ADP-50/PCI OME-DB-24P/24PD Isolated Input Board OME-PIO-D144OME-DB-24P OME-DB-24PD OME-DB-24R/24RD Relay Board OME-DB-24PR/24POR/24C OME-DB-24PRCOM OME-DB-24PR Daughter Board Comparison Table Pin Assignment VCCGND OME-PIO-D144 User’s Manual Ver.2.1, Sep/2001 PC’s physical slot information How to Find the I/O AddressResource-allocated information PIO/PISO identification informationOME-PISO-P8R8 OME-PIO-821OME-PISO-P32C32 OME-PISO-P32A32PIODriverInit&wBoards, wSubVendor,wSubDevice,wSubAux PIODriverInitPIOGetConfigAddressSpace ShowPIOPISO Slot5 0x0A Slot6 0x08 Slot7 0x09 Slot8 0x07 Assignment of I/O AddressOME-PIO-D144 User’s Manual Ver.2.1, Sep/2001 Address Read Write RESET\ Control RegisterRESET\ I/O Address MapCN1PC3 CN1PC2 CN1PC1 CN1PC0 AUX Control RegisterAUX data Register INT Mask Control RegisterInterrupt Polarity Control Register Aux Status RegisterActive I/O Port Control Register Read/Write 8-bit data RegisterCN6PC CN6PB CN6PA CN5PC CN5PB CN5PA 9 I/O Selection Control RegisterCN2PC CN2PB CN2PA CN1PC CN1PB CN1PA CN4PC CN4PB CN4PA CN3PC CN3PB CN3PA\TC\LARGE\LIB\PIO.H \TC\LARGE\\TC\LARGE\LIB\ \TC\LARGE\DEMO?\OME-PIO-D144.H Demo1 Use D/O of CN1 CN3 CN4 Demo2 Use D/O of CN1~CN6 PA/PB/PC COUNT=0 Demo3 Interrupt demo1Refer to Sec .5.1 for more information Demo4 Interrupt demo2 Refer to Sec .5.2 for more information Demo5 Interrupt demo3 CN1PC1 OME-PIO-D144 User’s Manual Ver.2.1, Sep/2001 Demo 6 Outport of CN1-CN6 OME-PIO-D144 User’s Manual Ver.2.1, Sep/2001 Demo10 Find Card Number OME-PIO-D144 User’s Manual Ver.2.1, Sep/2001 WARRANTY/DISCLAIMER Temperature