Omega Vehicle Security OME-PIO-D56 manual Specifications, Order Description, Options

Page 6

1.2Specifications

•All inputs are TTL compatible Logic high voltage : 2.4V (Min.) Logic low voltage : 0.8V (Max.)

•All outputs are TTL compatibleOPTO-22 output (CON3)

Sink current : 64mA (Max.)

Source current : 32mA(Max.)

16-channel output (CON1) Sink current : 8mA (Max.) Source current : 0.4mA(Max.)

•Environmental :

Operating Temperature: 0°C to 60°C

Storage Temperature: -20°C to 80°C

Humidity: 0 to 90% non-condensing

•Dimensions: 143mm X 105mm

•Power Consumption: +5V @ 530mA/420mA(OME-PIO-D56/OME-PIO-D24)

1.3Order Description

•OME-PIO-D56 : PCI bus 56-bit DI/O board

•OME-PIO-D24 : PCI bus 24-bit DI/O board

1.3.1Options

•OME-DB-24PD : 24 channel isolated D/I board

•OME-DB-24RD : 24 channel relay board

•OME-DB-24PRD : 24 channel power relay board

•OME-DB-16P8R : 16 channel isolated D/I and 8 channels relay output board

•OME-DB-24POR : 24 channel Photo MOS output board

•OME-DB-24C : 24 channel open-collector output board

•OME-ADP-20/PCI : extender, 20-pin header to 20-pin header for PCI bus I/O boards

OME-PIO-D56/PIO-D24 User Manual (Ver.2.1, Oct/2003, PPH-005-21)

---- 4

Image 6

Contents User’sGuide Benelux CanadaMexico Czech RepublicOME-PIO-D56/D24 Table of Contents Features IntroductionSpecifications Order DescriptionOptions Product Checklist PCI Data Acquisition FamilyOME-PISO-series cost-effective generation, isolated cards Hardware configuration Board LayoutI/O Port Location Enabling I/O Operation1 DI/DO Port Architecture CON3 Select Sec RESET\ Sec DI Port Architecture CON2 Do Port Architecture CON1 If INT signal is Low now Æ select the non-inverted input Interrupt OperationMake sure the initial level is High or Low Interrupt Block Diagram of OME-PIO D56/D24 Interrupt output signal of OME-PIO-D56/OME-PIO-D24, INT\ isINTCHAN0/1/2/3 Initialhigh, activelow Interrupt source COUNTL++Initiallow, activehigh Interrupt source Muliti-Interrupt Source PC0 PC1 PC2 PC3Read all interrupt state OME-DN-37 Daughter BoardsOME-DB-37 OME-DB-8125OME-ADP-20/PCI OME-DB-24PD Isolated Input Board OME-DB-24RD Relay Board OME-DB-24PRD, OME-DB-24POR, OME DB-24C Daughter Board Comparison Table All signals are TTL compatible Pin AssignmentDI0 DI1 DI2 DI3 DI4 DI5 DI6 DI7 DI8 DI9 PIO/PISO identification information How to Find the I/O AddressResource-allocated information PC’s physical slot informationWSubVendor=0x80 wSubDevice=1 wSubAux=0x40 For PIODriverInitPIODriverInit&wBoards, wSubVendor,wSubDevice,wSubAux D56/D24Printf\nThrer are %d Piopiso Cards in this PC,wBoards OME-PISO-P32C32 PIOGetConfigAddressSpace Enable all D/I/O operations of card0Enable all D/I/O operations of card1 ShowPIOPISO ShowPIOPISOwSubVendor,wSubDevice,wSubAuxAssignment of I/O Address Slot5 0x0A Slot6 0x08 Slot7 0x09 Slot8 0x07I/O Address Map Address Read WriteRESET\ Control Register AUX Control RegisterAUX data Register INT Mask Control Register Aux Status RegisterInterrupt Polarity Control Register 7 I/O Selection Control RegisterRead/Write 8-bit data Register How to install software & utility? Demo programPiopiso PIOPISO.EXE for Windows DEMO1 DEMO2 DEMO3 COUNT=0COUNT++ DEMO4 COUNT++ DEMO5 PC3CNTL1=CNTL2=CNTL3=CNTL4=0 Page WARRANTY/DISCLAIMER Temperature