MRV Communications TS5000/4U1/V*), TS5000/XYZ/V** InstallationCompletion, Visual Inspection

M R V C o m m u n i c a t i o n s , I n c . – I n s t a l l a t i o n M a n u a l

Visual Inspection

Visually check that all parts and cables are connected.

Closing the rear door

Put back the Rear Door and push it. Close the four screws I -- see Figure 6.11., Pay attention to the cables holding the rear door.

.

Captive	Cables holding
Screws I	the rear door

Fig. 6.11: Closing the rear door,

Screws I

Connect to the Ground the 2 grounding screws (screw S from the TereScope, and screw A from the JMP-8).

InstallationCompletion

Check that the heads appear as shown in the photographs below.

Fig. 6.12: Mounted TS5000 – Right View

51