Multi-Tech Systems MT3410ZLX-T/2 owner manual Driver Directory Structure, Carden.Exe

Page 32

MultiMobile Owner’s Manual

There are two available solutions:

1)Run enabler (CARDEN or existing PC Card drivers + CARDEN) before EMM386 or QEMM is loaded,

or

2)Exclude at least 4K of memory from EMM386’s or QEMM’s use. An exclusion of X=D000- D3FF will work well. There may also be additional exclusions for your PCMCIA drivers; don’t modify these.

Driver Directory Structure

The network drivers on this disk is organized in the following structure. Each directory contains a README.TXT file which provides detailed installation instructions for the drivers in that directory:

CARDEN.EXE	Direct PCMCIA Card Enabler for
	DOS; supports MT3410ZLX and
	Intel compatible, Compaq and
	Databook controllers.
LM28ODI.COM	MT3410ZLX DOS/ODI Driver
	working with direct enabler (LAN
	& MODEM run concurrently).
	Supports Intel compatible,
	Compaq and Databook controllers.
LM28NDS.DOS	MT3410ZLX DOS real mode
	NDIS Driver.
LM28PD.COM	MT3410ZLX DOS real mode
	Packet Driver.
LM28NDS.386	MT3410ZLX Enhanced Mode
	NDIS Driver for Windows for
	Workgroups.
LM28NDS.SYS	MT3410ZLX Enhanced Mode
	NDIS Driver for Windows 95.

32

Image 32

Contents Models MT3410ZLX MT3410ZLX-T/2 MultiMobileTM Model # MT3410ZLX & MT3410ZLX-T/2 Record of RevisionsContents Troubleshooting Comprehensive Driver NotesService Appendix a Technical Specifications Appendix B AT Commands Registers & Result CodesIntroduction and Description About This Manual About This ProductSpecifications Fax FeaturesModem Characteristics Ship Kit Contents System RequirementsIntroduction and Description Installation Safety Warnings Installing The MT3410ZLX or MT3410ZLX-T/2 Cards Menu Installation Driver Software InstallationNovell NetWare Installation Driver Installation Screen Manual Driver Installation Carden Novell Client Installation VLM Microsoft LAN Manager Installation Microsoft LAN Manager Installation Screen Packet Driver Installation Select the Enhanced mode NDIS3 for.... string and press OK Select the Real mode NDIS2 for... string and press OK NDIS2 Driver for WorkgroupODI Driver for Workgroups Select the Netware ODI Driver ... string and press OK Windows NT 3.51 / NT 4.0 Installation Windows 95 Installation Driver from disk provided by hardware manufacturerArtisoft Lantastic 6.0 Installation Factory Default Settings PC Card Software Manual InstallationComprehensive Driver Notes Introduction Quick StartVendor Device Loaded in CONFIG.SYS Using DOS Extended Memory Managers Getting StartedDriver Directory Structure CARDEN.EXEDriver Upgrades Example of partial AUTOEXEC.BAT file LM28NDS2NIF Drivername LM28NDS$ \WFW311\NETSTART Troubleshooting Introduction No Response to AT CommandsModem Does Not Execute the Command Line Modem Goes Off-Hook and Disables the Telephone LineModem Does Not Auto-Answer the Phone Characters on the Screen Are DoubledCommunications Software Dials, but Fails No Text Appears on the Screen in Data ModeNo Text Appears on the Screen When in Command Mode Modem Loses the Connection When in Use Modem Connects with Some Modems, but Not OthersModem Does Not Connect with Another Modem Occasionally, the Modem Gives a Burst of ErrorsModem Gets Random Errors in Transmitted Data Text on the Screen Is Not Legible When Using V.42bis or MNP5, Some Features Are Disabled ConnectExample Device=C\DOS\EMM386.EXE RAM X=D000-D3FF Enabling The MT3410ZLXSelect Use Plug and Play Installing The Win 95 Driver Over SystemSoft CardWorksSelect Properties Select Drivers in Properties COM Port and IRQ Conflicts WindowsWindows Service Limited WarrantyOn-line Warranty Registration Software User License AgreementService Tech Support Recording Modem InformationService How to Use the Multi-Tech BBS About the Multi-Tech BBSAbout CompuServe/Internet About the Multi-Tech Fax-Back System Data Operating SystemsPhysical Appendix B AT Commands Registers & Result Codes Introduction How To Use AT CommandsAT&K3H0Enter Basic AT CommandsCommand Options Function & Description Select Bell 212A for 1200 bps Command Options Function & Description Result code disabled AT& Ampersand Commands Set flow control Grant request from remote for RDL AT% Percent Commands AT\ Back Slash CommandsCommand Options Function & Description =0 or Connect AT- Dash Commands Registers ATSn=x Appendices Page Appendices S62 DTE rate status. The factory default is Appendices Result Codes 333 Carrier Consumer Instructions Page Appendices Page FCC Fax Update Canadian Limitations NoticePage AT Commands, S-Registers Dash Commands Data Specifications Desired DCE speed Installation Installing The MT3410ZLX or PC Card Software Manual Installation Service