Multi-Tech Systems MT3410ZLX-T/2 owner manual Appendices

Appendices

S30=0-90

S30 controls the Inactivity timer, which sets the length of time, in minutes, that the modem counts when there is no data flow in or out the DTE serial port. A connection is disengaged when the counter reaches the preset value. Setting to S30 =0 disables the inactivity timer. The factory default settings is 000.

S37=Desired DCE speed (line speed). The factory default settings is 000.

0Attempt to connect at the last “AT” speed

3Attempt to a 300 bps connection

5Attempt to a 1200 bps connection

6Attempt to a 2400 bps connection

7Attempt to a 4800 bps connection

8Attempt to a 7200 bps connection

9Attempt to a 9600 bps connection

10Attempt to a 12000 bps connection

11Attempt to a 14400 bps connection

12Attempt to a 16800 bps connection

13Attempt to a 19200 bps connection

14Attempt to a 21600 bps connection

15Attempt to a 24000 bps connection

16Attempt to a 26400 bps connection

17Attempt to a 28800 bps connection

18Attempt to a 33600 bps connection

S46=0-255

S46 Sets the length of time in 100 mSec, before the modem goes into standby mode. A value of 255 prevents standby mode. The factory default settings is 100.

75