Multi-Tech Systems MT3410ZLX-T/2 owner manual Command Options Function & Description

MultiMobile Owner’s Manual

Command	Options Function & Description
En	AT command echo options
E0	Echo disabled
E1*	Echo enabled
Hn	Switch-hook control
H0	Modem goes on-hook
H1	Modem goes off-hook
Mn	Speaker control
M0	Speaker always off
M1 *	Speaker on until carrier present
M2	Speaker always on
M3	Speaker off during dialing and on until
	carrier present
Nn	Select negotiate handshake
N0	When originating or answering,
	handshake only at the communication
	rate specified by S37 register and
	“ATBn” and no fallback
N1 *	When originating or answering, start
	handshaking only at the
	communication standard specified by
	S37 register and “ATBn” During
	handshake, fallback to a lower speed
	may occur except in “AT\N1” mode
On	Go on-line
O0	Return modem to a previously
	established state
O1	Begin an equalizer retrain sequence,
	then return to on-line state
O3 to O14	Force modem to a new rate that is
	user defined. New rates are defined in
	S62 register
P	Enable pulse dialing
Qn	Result code display options
Q0 *	Result code enabled

* Factory default setting

62