Multi-Tech Systems MT3410ZLX-T/2 owner manual Select Bell 212A for 1200 bps

	Appendices
Command	Options Function & Description
B1 *	Select Bell 212A for 1200 bps
	connection and Bell 103 for 300 bps
B2	Select V.23 1200 bps for receiving, 75
	bps for transmitting in originate mode;
	75 bps for receiving and 1200 bps for
	transmitting in answer mode
B3	Select V.23 75 bps for receiving, 1200
	bps for transmitting in originate mode;
	1200 bps for receiving and 75 bps for
	transmitting in answer mode
Dn	Dial command, beginning the dialing
	sequence. The string “n” (telephone
	number and modifiers) listed as
	follows is entered after the “D”
	command
P	Pulse dial. Only digits 0 to 9 can be
	dialed
R	Reverse dial. Originate call in answer
	mode (go on-line in answer mode)
Sn	Dial the phone number stored in
	NVRAM at location “n” (n=0, 1, 2, 3)
T	DTMF tone dial. Any digit 0 to 9, *, #,
	A, B, C… may be dialed as a tone
W	Wait for second dial tone. The modem
	waits for the second dial tone before
	processing the dial string
,	Pause. Cause the modem to pause for
	a time before processing the dial string
	(designed by S8 register)
!	Flash hook (for call transfer). Cause
	the modem to go on-hook for 0.5
	second then return off-hook
@	Wait for 5 seconds of silence after
	dialing number
;	Return to command state after dialing
	a number without disconnecting the
	call

* Factory default setting

61