Multi-Tech Systems MT3410ZLX-T/2 owner manual =0 or

	Appendices
Command	Options Function & Description
	n=0 or 1
	Empty the data buffers and send the
	break to the remote modem
	n=2 or 3
	Send break to the remote modem
	immediately
	n=4 or 5
	Send break to the remote modem in
	sequence with data. In on-line data
	state with normal mode, receive break
	signal from remote at modem port,
	send to serial port
	n=0 or 1
	Empty the data buffers and send the
	break to the local DTE
	n=2 or 3
	Send break to local DTE immediately
	n=4 or 5
	Send break to the local DTE in
	sequence with data
\Nn	Modem protocol options
\N0	Normal mode. No protocol, but flow
	control is allowed
\N1	Direct mode. No protocol and no flow
	control is allowed
\N2	MNP reliable mode
\N3 *	LAPM, MNP or normal mode
\N4	LAPM or MNP mode
\Qn	DTE flow control options
\Q0	Disable flow control
\Q1	XON/XOFF software flow control
\Q2	CTS flow control to DTE
\Q3	RTS/CTS hardware flow control

* Factory default setting

69