MultiMobile Owner’s Manual
Windows NT 3.51 / NT 4.0 Installation
1.Install the PCMCIA support for your particular make and model of laptop from the Service Packs.
Note that: These must be verified to be working properly before continuing, and Support for this level of driver is from the laptop manufacturer only.
2.From the Main window, select Control Panel.
3.In the Control Panel, select Network Icon.
4.In Network Setup, select Add Adapter. Windows NT will display a list of all available drivers.
5.Select OTHERS for
6.Insert the Driver disk in the floppy (e.g., A) drive and type A:\ . Windows NT tries to locate the OEMSETNT.INF file in the specified path. If it exists there, Windows NT will then copy the appropriate drivers to the Windows NT system. The drivers are now properly installed Proceed to the next steps, and refer to your Windows NT installation guide for information on these steps.
7.Windows NT pops up a window to ask the values of some keywords (e.g., IO Port, IRQ Number, and Memory Base). After initial installation, the drivers are permanently installed to the Windows NT system. Subsequent access of the Network Drivers list will include these drivers as options.
26