Multi-Tech Systems CF220 manual Did

Chapter 2: Sample System

Step 3 Technical: Enter operating parameters of CallFinder channel (FXO)

Each of the CallFinder’s DID-channel modems has 4 user-specified parameters. You set them in the CallFinder software.

	CF220		Power	Channel 2	Channel 1	Ethernet	Power
			48Vdc				5Vdc
		(Rear)		FXS/FXO DID	FXS/FXO DID	10/100
Technical Parameters
of CallFinder
DID-Channel Modem
			Channel Configuration: Channel 1
Max DID Digits	4			DID Start		wink	immediate	delay dial
Extension Port		FXS	FXO	Auto Attendant Delay		0
Extension Mic Gain		8		Extension Speaker Gain		30
Polarity		A	B

Telco

DID

Outlet

PBX

Station

Port

Technical Parameters Related to CallFinder’s Extension Port Line

Parameter	Value	Comments
Extension Port	FXO	Use FXO whenever CallFinder channel connects to
		PBX station port.
Auto Attendant Delay	0	Describes how long the CallFinder waits before
	(in seconds)	dialing. If set to 0, CallFinder calls as soon as PBX
		dial tone is present. If no dial tone is present, the call
		cannot be completed.
Extension Mic Gain	8	This describes the amplification of the sound input at
		the local phone user’s mouthpiece microphone.
		The default value is typically appropriate.
		This is a very sensitive parameter and mis-adjustment
		can render the channel inoperable.
		Adjust carefully and only if needed.
Extension Speaker Gain	30	This describes the amplification of the sound output at
		the local phone user’s earpiece speaker.
		The default value is typically appropriate.
		This is a very sensitive parameter and mis-adjustment
		can render the channel inoperable.
		Adjust carefully and only if needed.

Multi-Tech Systems, Inc. CF220 CallFinder User Guide 15