Multi-Tech Systems MT2834ZPX owner manual Command Values

MT2834ZPX Owner's Manual

COMMAND:	&Cn
VALUES:	n = 0, 1, 2 or 4
DEFAULT:	&C1
DESCRIPTION:
	&C0 forces Carrier Detect on.
	&C1 lets Carrier Detect act normally.
	&C2 lets Carrier Detect drop S24 time on disconnect.
	&C4 resets modem when Carrier Detect drops.
COMMAND:	&CDn
VALUES:	n = 0 or 1
DEFAULT:	&CD0
DESCRIPTION:
	&CD0 execute cleardown on disconnect.
	&CD1 do not execute cleardown on disconnect.
COMMAND:	Ds
VALUES:	s = phone #
DEFAULT:	n/a
DESCRIPTION:
	Dial a telephone number “s” , where s may
	include up to 60 digits or T, P, R, comma and ; characters.
COMMAND:	DsNd
VALUES:	s = phone # and d = 0 thru 9
DEFAULT:	n/a
DESCRIPTION:
	Store telephone number. To store, phone number ”s“ is en
	entered and followed by N and then Directory Number “d.”
COMMAND:	&Dn
VALUES:	n = 0 thru 3
DEFAULT:	&D2
DESCRIPTION:
	&D0 means DTR is ignored
	&D1means modem returns to command mode.
	&D2 lets modem react to DTR normally.
	&D3 causes modem to reset to modem default parameters.
COMMAND:	$Dn
VALUES:	n = 0 or 1
DEFAULT:	$D0
DESCRIPTION:
	$D0 disables DTR Dialing.
	$D1 enables DTR Dialing.

26