Multi-Tech Systems MT2834ZPX owner manual Command Values Default Description

	Chapter 4 - AT Commands, S-Registers and Result Codes
COMMAND:	$MBn
VALUES:	n = speed
DEFAULT:	$MB33600 bps
DESCRIPTION:
	$MB75 selects CCITT V.23 mode.
	$MB300 selects 300 bps on-line.
	$MB1200 selects 1200 bps on-line.
	$MB2400 selects 2400 bps on-line.
	$MB4800 selects 4800 bps on-line.
	$MB9600 selects 9600 bps on-line.
	$MB14400 selects 14400 bps on-line.
	$MB19200 selects 19200 bps on-line.
	$MB28800 selects 28800 bps on-line.
	$MB33600 selects 33600 bps on-line.
COMMAND:	Nd
VALUES:	d = 0 thru 9
DEFAULT:	n/a
DESCRIPTION:
	Dial stored telephone number “d” (Do not
	include the letter D in this command.)
COMMAND:	NdNe
VALUES:	d = 0 thru 9; e = any other number 0 thru 9
DEFAULT:	n/a
DESCRIPTION:
	Number Linking. If first number dialed is
	busy, another stored number may be
	automatically dialed.
COMMAND:	O
VALUES:	n/a
DEFAULT:	n/a
DESCRIPTION:
	Exit Command Mode and go into On-Line Mode.
COMMAND:	P
VALUES:	n/a
DEFAULT:	Tone Dial
DESCRIPTION:
	Modem will pulse-dial numbers following the P.

31