Multi-Tech Systems MT2834ZPX owner manual Command Values Default

MT2834ZPX Owner's Manual

COMMAND:	I9
VALUES:	N/A
DEFAULT:	Read Only Command
DESCRIPTION:
	The I9 command is a query to display this modem's
	characteristics when operating within Windows 95.
	Entering ATI9<cr> invokes ZPX 28800 FAX CT
	on your video monitor.
	(The response to the query reveals that this modem is a
	ZPX, 28.8K, FAX and Class Two capable device.)
COMMAND:	L
VALUES:	5, 6, 7, 8, 9, 10 and 11
DEFAULT:	Read Only Command
DESCRIPTION:
	L5 lists all current operating parameters.
	L6 lists all current S-Register values.
	L7 lists additional parameters.
	L8 lists current on-line diagnostics.
	L9 displays Signal Strength Information.
	L10 displays Signal to Noise Ratio
	Information.
	L11 displays Noise Information.
COMMAND:	#Ln
VALUES:	n = 0 thru 3
DEFAULT:	#L0
DESCRIPTION:
	#L0 selects modems to negotiate V.42 Mode.
	#L1 selects MNP on and LAP-M off.
	#L2 selects LAP-M on and MNP off.
	#L3 selects no detection phase, go directly to LAP-M.

30