Command \Kn Break Control | Multi-Tech Systems MT5600BA-V92 specs

			Chapter 2 – AT Commands
Command: \Kn		Break Control
Values:		n = 0–5
Default:		5
Description:		Controls the response of the modem to a break received from the computer, the remote
		modem, or the \B command. The response is different for each of three different states.
		Data mode. The modem receives the break from the computer:
		\K0	Enter online command mode; no break sent to the remote modem.
		\K1	Clear data buffers and send break to the remote modem.
		\K2	Same as \K0.
		\K3	Send break immediately to the remote modem .
		\K4	Same as \K0.
		\K5	Send break to the remote modem in sequence with the transmitted data.
		Data mode. The modem receives the break from the remote modem during a non-error-
			corrected connection:
		\K0	Clear data buffers and send break to the computer.
		\K1	Same as \K0.
		\K2	Send break immediately to the computer.
		\K3	Same as \K2.
		\K4	Send break to the computer in sequence with the received data.
		\K5	Same as \K4.
		Online command mode. The modem receives a \Bn command from the computer:
		\K0	Clear data buffers and send break to the remote modem.
		\K1	Same as \K0.
		\K2	Send break immediately to the remote modem.
		\K3	Same as \K2.
		\K4	Send break to the remote modem in sequence with the transmitted data.
		K5	Same as \K4.
Command:	\Nn Error Correction Mode Selection
Values:		n = 0–5
Default:		3
Description:		\N0	Normal (non-error correction) mode with data buffering. Forces &Q6.
		\N1	Direct mode. Equivalent of &M0 and &Q0 modes. Forces &Q0.
		\N2	V.42/MNP reliable (error-correction) mode. Modem attempts first a V.42
			connection and then an MNP connection. Failure to make a reliable connection
			results in the modem hanging up. Forces &Q5, S36=4, and S48=7.
		\N3	V.42/MNP auto-reliable mode. Modem attempts first to connect in V.42 mode,
			then in MNP mode, and finally in non-error-correction mode with data buffering.
			Forces &Q5, S36=7, and S48=7.
		\N4	V.42 (LAPM) reliable mode. If modem cannot make a V.42 connection, it
			disconnects. Forces &Q5 and S48=0. Note: -K1can override \N4.
		\N5	MNP reliable mode. If the modem cannot make an MNP connection, it
			disconnects. Forces &Q5, S36=4, and S48=128.
Command:	\Vn Single Line Connect Message
Values:		n = 0 or 1
Default:		0
Description:		\V0	Disables single line connect message. CONNECT messages are controlled by
			the X, W, and S95 settings.
		\V1	Enables single line CONNECT. Formatted: CONNECT <Serial PortSpeed>
			</Modulation></Protocol></Compression></Line Speed>/<Voice and Data>.
			Overrides X, W, and S95 commands. CONNECT messages display in the single
			line format subject to V and Q. In non-verbose mode (V0), single line CONNECT
			messages are disabled and a single numeric result code is generated.
Command:	+FCLASS=		Set Current Fax Class
Values:		0, 1, 2, 8
Default:		None
Description:		0	Data
		1	Fax – Class 1, Class 1.0
		2	Fax – Class 2, 2.0, 2.1
		8	Voice Commands

Report Commands:	+FCLASS?	Reports current or selected values.
	+FCLASS=?	Reports supported range of parameter values.

Multi-Tech Systems, Inc. AT Commands Reference Guide (S000273G)			13

MT5600BA-V92 specifications

Multi-Tech Systems MT5600BA-V92 is a versatile communication device designed for efficient data transmission over telephone lines. It is highly regarded for its reliability and performance in various applications, including point-of-sale transactions, remote monitoring, and data acquisition. One of the key features of the MT5600BA-V92 is its ability to operate at data rates of up to 56 Kbps. This high-speed modem ensures rapid data transfer, making it suitable for businesses that require quick and efficient communication.

The device supports V.92 technology, which enhances the performance of dial-up connections. V.92 provides features like cheaper call setup times, reduced latency, and improved upload speeds compared to older standards. This makes the MT5600BA-V92 an ideal choice for users who need enhanced data performance without investing in more complex networking infrastructure.

Another significant characteristic of the MT5600BA-V92 is its analog communication capabilities. The modem utilizes standard analog telephone lines for connectivity, allowing easy integration into existing telephony systems. This compatibility ensures that businesses can leverage their current infrastructure without needing substantial upgrades.

The MT5600BA-V92 integrates several features for improved functionality, including error correction and data compression technologies. These features enhance the reliability of data transmission by ensuring that lost or corrupted data packets are retransmitted, while compression reduces the amount of data sent over the line, further optimizing performance.

The modem is designed with user-friendliness in mind; it features a straightforward installation process and an intuitive configuration interface. Furthermore, it is compact and robust, making it suitable for diverse environments ranging from retail outlets to industrial applications.

The MT5600BA-V92 is also known for its durability and long life cycle, which is crucial for businesses that rely on continuous operations. Additionally, its ability to operate effectively in various conditions solidifies its position as a dependable communication solution.

In summary, the Multi-Tech Systems MT5600BA-V92 is an advanced modem that combines high-speed data transmission, analog compatibility, and robust error correction features. Its reliable performance and user-friendly design make it an excellent choice for businesses looking to enhance their communication capabilities while utilizing existing telephone infrastructure.

Command: \Kn

Break Control

Values:

Command:

\Nn Error Correction Mode Selection

Values:

Command:

\Vn Single Line Connect Message

Default:

</Modulation></Protocol></Compression></Line Speed>/<Voice and Data>.

+FCLASS=

Set Current Fax Class

Report Commands:

+FCLASS=?

MT5600BA-V92 specifications