N-Tron 102PC-SE user manual UDP Configuration, Autodial Configuration

∙Inactivity: Enables/Disables the inactivity timeout feature. If this is enabled, the telnet/tcp session is terminated if there is no traffic for the configured timeout value

Default: disable

∙Inactivity Timeout: Sets the timeout (t seconds) value for the telnet session to be terminated if there is no traffic

Default: 300 seconds

∙Raw Mode: Enables/Disables the raw mode for Telnet Auto-Dialout and Serial Auto-Dialin features globally

Default: disable

UDP Configuration

∙Terminate Monitor: Sets "monitor" flag which enables/disables the scanning of terminate sequence by the UDP server

Default: enable

∙Terminate String: Sets the terminate sequence to be scanned and terminates udp auto-dialout session

Default: +++inet

∙Inactivity: Enables/disables inactivity timeout feature

Default: disable

∙Inactivity Timeout: Sets the timeout(t seconds) value for the telnet session to be terminated if there is no traffic

Default: 300 seconds

Autodial Configuration

∙Autodialin Configuration

oAutodialin: Enables/Disables the Serial Auto-Dialin feature for the serial port S0. Auto-Dialin feature on this port is enabled only if global Auto- Dialin is enabled

Default: disable

oAutodialin Port: Sets the Serial Auto-Dialin port number to which the session should be establised

Default: 23

oIP Address: Sets the Serial Auto-Dialin IP address

Default: 127.0.0.1

oProtocol: Sets the protocol to be used by Serial Auto-Dialin feature. Telnet and Udp protocols are supported

Default: telnet

oRaw Dialin: Enables/Disables raw mode for Serial Auto-Dialin session on the serial port s0. The session will be in Raw mode only if the global raw mode is enabled

Default: disable

∙Autodialout Configuration

oAutodialout: Enables/Disables the Auto-Dialout feature for the serial port S0. Auto-Dialout feature on this port is enabled only if global Auto- Dialout is enabled

Default: enable

oAutodiaout Port: Sets the Serial Auto-Dialout IP address

Default: 5000

oProtocol: Sets the protocol to be used by Auto-Dialout feature. Telnet or/and Udp protocols can be used

Default: telnet

oHost Interaction Mode: Enables/Disables the host interactive mode for HTTP server. When this mode is enabled, the host/serial device can use HTTP server

Note: Telnet Auto-Dialout and PPP cannot be enabled when this mode is enabled.

Default: disable

oRaw Dialout: Enables/Disables raw mode for Auto-Dialout session on the serial port s0. The session will be in Raw mode only if the global raw mode is enabled

Default: disable

FTP Configuration

∙Sets/Clears the remote machine, login name, password and account password details which will be used by FTP for automatic authentication

∙Password is an optional parameter and can be configured along with machine and login names only

∙Account Password is an optional parameter and can be configured along with machine login name and password only IP Module prompts for login name and password if these details are NULL

∙File Name: Sets the filename to be used for ftp file transfer

∙Filesize: Sets the data size to be sent to the server

∙Directory: Sets the directory path used by transmit and list commands

Default for all the above: NULL

(continued…)

12/1/2006 23