N-Tron 102PC-SE user manual Serial to Ethernet Connectivity

Page 31

Serial to Ethernet Connectivity

Mandatory Configuration Settings

The following items must be configured in order to use the manual dial-in feature:

∙Disable Auto dial-in globally on all the serial ports.

#set serial auto-dialin disable

∙Disable Auto dial-in on the serial port s0.

#set serial s0 auto-dial-in disable

The following items must be configured in order to use the auto dial-in feature:

∙Enable Auto dial-in globally on all the serial ports.

#set serial auto-dialin enable

∙Enable Auto dial-in on the serial port s0.

#set serial s0 auto-dial-in enable

∙Set the Auto dial-in protocol.

#set serial s0 auto-dialin-protocol <telnet or udp>

∙Set the Auto dial-in Server IP Address.

#set serial s0 auto-dialin-ipaddress <ipaddress>

∙Set the port to the one which the telnet client will be connected.

#set serial s0 auto-port-port <port_number>

An ERROR message will display if any of the above details are not configured or not valid.

Optional Configuration Settings

The following details are optional configurations:

∙Enable/Disable Switching-between-Dial-inand the Command Prompt feature.

#set serial escape-monitor <enable/disable>

∙Set the Escape-Monitor-Stringto switch between Dial-in and Command Prompt sessions.

#set serial escape-string "+++inet"

∙Set the Serial Dial-in Trigger mode. Dictates the criterion for establishing a connection. The options provided are on reception of <char/ dtr/ dtr-char/ none>. Refer the command line configuration section for a detail know how of this command.

#set serial s0 auto-dialin trig-mode <char/dtr/dtr-char/none>

∙Enable/Disable the Raw mode globally for all Auto-Dial-in sessions.

#set ip telnet raw-mode <enable/disable>

∙Enable/Disable the Raw mode for Auto-Dial-in session on serial port s0.

#set serial s0 raw-dial-in <enable/disable>

12/1/2006

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents 12/1/2006 Table of Contents 12/1/2006 Contact Information Safety WarningsEnvironmental Safety Electrical Safety Cleaning Package ContentsUnpacking DIN Rail Mounting ServicingColor Description Front PanelApplying Power Top View Grounding Techniques Connecting the Unit Serial Cable Serial InterfaceRS-232 Support FCC Statement TroubleshootingCLI Tree of Menus Set Set configurable fields Send-mail Configure outgoing mail options Recv-mail Configure incoming mail optionsSerial Configure the serial settings for the serial port s0 Show Show general and detailed information Socket Actions to take over a UDP socket Web Management Software Configuration12/1/2006 Web Management Tree of Menus General ConfigurationUser Configuration Port ConfigurationChatscript Modem ConfigurationBridge Configuration PPP ConfigurationSuccessfully. These cannot be modified Telnet ConfigurationAutodial Configuration UDP ConfigurationPOP3 Configuration Http ConfigurationSnmp Configuration Smtp Address ConfigurationSntp General Sntp Daylight Saving ConfigurationCommands Restore DefaultsEthernet to Serial Connectivity Mandatory Configuration SettingsScenario 1 Manual Dialout Commands to Setup Manual Dial-out with the 102PC-SEPrerequisites Scenario 2 Auto Dialout Using TelnetAuto Dialout Feature using UDP Mode Scenario 3 Auto Dialout Using UDPScenario 4 Remote Bridging with Modem Connection # set ppp ppp0 raw-mode enableSerial to Ethernet Connectivity Scenario 1 Manual Serial Dial-in Commands to Setup Manual Dial-In with the 102PC-SEScenario 2 Serial Auto Dial-in Using Telnet Functionality Scenario 3 Serial Auto Dial-in Using UDP# set ip telnet raw-mode enable Scenario 4 Serial Tunneling Mode# set serial s0 raw-dialout enable Using E-Mail Features Sending Text E-mails from the Command Prompt Receiving E-mails from the Command Prompt Physical KEY SpecificationsSwitch Properties Emissions and Safety ApprovalsTron Limited Warranty
Top Page Image Contents