N-Tron 102PC-SE user manual KEY Specifications, Switch Properties, Physical, Electrical

Page 39

	KEY SPECIFICATIONS
Switch Properties
Number of MAC Addresses	10,000
Physical
Height:	3.98" (10.11cm)
Width:	2.01" (5.10 cm)
Depth:	3.91" (9.931 cm)
Weight:	0.75 lbs (0.3 kg)
DIN rail:	35mm

Electrical

Redundant Input Voltage: 10-30 VDC (Regulated)

Input Current:	40 mA @ 24VDC (Steady State)
Inrush Current:	7.0 Amp / 0.5 ms @ 24VDC
Environmental
Operating Temp:	0°C to 70°C
Storage Temp:	40°C to 85°C
Operating Humidity:	20% to 95% (Non Condensing)
Operating Altitude:	0 to 10,000 ft.
Shock and Vibration (bulkhead mounting)
Shock:	200g @ 10ms
Vibration/Seismic:	50g, 5-200Hz, Triaxial
Reliability
MTBF:	>2Million Hours
Network Media
10BaseT:	>Cat3 Cable
100BaseTX:	>Cat5 Cable
Connectors
10/100BaseTX:	One (1) RJ-45 TX Copper Port
Serial Port
Com Parameters	400, 4800, 9600,
	19.2K, 38.4K, 57.6K,
	115.2K
Recommended Wiring Clearance:
Front:	2" (5.08 cm)
Top:	3" (7.62 cm)

Emissions and Safety Approvals:

FCC Part 15 Class A

12/1/2006

39

Image 39

Contents 12/1/2006 Table of Contents 12/1/2006 Contact Information Safety WarningsEnvironmental Safety Electrical Safety Package Contents CleaningUnpacking DIN Rail Mounting ServicingColor Description Front PanelApplying Power Top View Grounding Techniques Connecting the Unit Serial Interface Serial CableRS-232 Support FCC Statement TroubleshootingCLI Tree of Menus Set Set configurable fields Recv-mail Configure incoming mail options Send-mail Configure outgoing mail optionsSerial Configure the serial settings for the serial port s0 Show Show general and detailed information Socket Actions to take over a UDP socket Web Management Software Configuration12/1/2006 Web Management Tree of Menus General ConfigurationUser Configuration Port ConfigurationChatscript Modem ConfigurationBridge Configuration PPP ConfigurationSuccessfully. These cannot be modified Telnet ConfigurationAutodial Configuration UDP ConfigurationPOP3 Configuration Http ConfigurationSnmp Configuration Smtp Address ConfigurationSntp General Sntp Daylight Saving ConfigurationCommands Restore DefaultsEthernet to Serial Connectivity Mandatory Configuration SettingsScenario 1 Manual Dialout Commands to Setup Manual Dial-out with the 102PC-SEPrerequisites Scenario 2 Auto Dialout Using TelnetAuto Dialout Feature using UDP Mode Scenario 3 Auto Dialout Using UDPScenario 4 Remote Bridging with Modem Connection # set ppp ppp0 raw-mode enableSerial to Ethernet Connectivity Scenario 1 Manual Serial Dial-in Commands to Setup Manual Dial-In with the 102PC-SEScenario 2 Serial Auto Dial-in Using Telnet Functionality Scenario 3 Serial Auto Dial-in Using UDPScenario 4 Serial Tunneling Mode # set ip telnet raw-mode enable# set serial s0 raw-dialout enable Using E-Mail Features Sending Text E-mails from the Command Prompt Receiving E-mails from the Command Prompt Physical KEY SpecificationsSwitch Properties Emissions and Safety ApprovalsTron Limited Warranty