Milan Technology MIL-S1000 Ports 10/100Base-TX Module, Ports 10/100Base-Tx Module Features

Page 10

8 ports 10/100Base-TX Module

Figure 1-4.8 port 10/100Base-TX Module

When installed into a MIL-S1000 switch, the 10/100Base- TX Module provides 8 10/100Mbps Switch ports which can connect the MIL-S1000 to a 10Mbps or 100Mbps switch or end station.

8Ports 10/100Base-Tx Module Features

"8 10/100Base-TX N-Way Switch ports.

"Conforms to IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX and IEEE 802.3x standards

"Store and forward switch architecture for abnormal packet filtering

"Support for half and full duplex on all ports

"Backplane up to 2.4Gbps

"2M memory Buffer support

"Automatic address learning with 12K address entry storage

"Filtering and forwarding rate of 14,880~148,800 packets per second

Image 10

Contents MIL-S1000  Copyright Table of Contents Introduction Planning your NetworkInstallation Module Install and RemovedIntroduction Package Contents Device Description, Features and Capabilities MIL-S1000 Front and Rear PanelsRed Full Duplex/Col indicators Page Ports 10/100Base-Tx Module Features Ports 10/100Base-TX ModuleDIP Switch with Link Mode Dip switch location and mode settings8 Ports 10/100Base-TX Module DIP switch functions Ports 100Base-FX Fiber Module 2 port 100Base-FX Module Front ViewPorts 100Base-FX Fiber Module Features Page 4 port 100Base-TX/FX Front View Location and setting duplex mode Ports 100Base-FX Fiber Module FeaturePage 1000Base-SX/LX Fiber Module Features 1000Base-SX/LX Fiber ModuleEnable N-way Full Duplex Planning your Network 10Base-T Ethernet Network Guidelines100Base-TX Ethernet Network Guidelines 100BASE-FX Network Guidelines1000BASE-SX and LX Network Guideline Network PlanningExpanded Networks 10Base-T Networks100Base-TX Networks Expanding your 100Base-TX network ClassCollapsed Backbone Link 100Base Solution Fileserver LinkFileserver Link 1000Base Solution Multiport Bridge with High-Bandwidth BackboneUsed as a Multiport Bridge Installation Supplying Power Rack InstallationPage Connecting the Switch Module Installation and Removal Handling the ModulesModule Setup and Installation Insert the moduleInstalling 10/100Base-TX Modules Installing the ModulesInstalling 100Base-FX Modules Installing 1000Base-SX/LX Modules Removing the ModulesPhysical Characteristics Compatibility with Ethernet StandardsAddress Table Switching ArchitectureLED Indicators Forwarding RateAppendix B. Pin Assignments Switch Adapter Hub