Milan Technology MIL-S1000 user manual Introduction

Page 5

Chapter 1 Introduction

MIL-S1000 switches are multi-speed network devices combining Ethernet, Fast Ethernet and Gigabit Ethernet capabilities in a single compact, rack-mountable cabinet. Combining 10Mbps Ethernet, 100Mbps Fast Ethernet and Gigabit Ethernet interfaces in one unit allows these switches to unclog existing LANs and provide a path to efficient, high-speed networking.

The MIL-S1000 switch is a combination of a 4-slot host cabinet which accepts 4 different media modules and One RS-232 port for SNMP(Optional). A maximum configuration of 32 x 10/100Base-Tx switched ports can be achieved using 4×8 port 10/100Base-Tx modules. In the same way,

amaximum configuration of 32×10/100Base-TX or 16×100Base-FX ports or 4x 1000Base-SX can be accommodated in the host cabling. Any of the above modules can be integrated to give up to many different configurations.

Image 5

Contents MIL-S1000  Copyright Planning your Network Table of Contents IntroductionModule Install and Removed InstallationIntroduction Package Contents MIL-S1000 Front and Rear Panels Device Description, Features and CapabilitiesRed Full Duplex/Col indicators Page Ports 10/100Base-TX Module Ports 10/100Base-Tx Module FeaturesDip switch location and mode settings DIP Switch with Link Mode8 Ports 10/100Base-TX Module DIP switch functions 2 port 100Base-FX Module Front View Ports 100Base-FX Fiber ModulePorts 100Base-FX Fiber Module Features Page 4 port 100Base-TX/FX Front View Ports 100Base-FX Fiber Module Feature Location and setting duplex modePage 1000Base-SX/LX Fiber Module 1000Base-SX/LX Fiber Module FeaturesEnable N-way Full Duplex 10Base-T Ethernet Network Guidelines Planning your Network100BASE-FX Network Guidelines 100Base-TX Ethernet Network GuidelinesNetwork Planning 1000BASE-SX and LX Network Guideline10Base-T Networks Expanded NetworksExpanding your 100Base-TX network Class 100Base-TX NetworksCollapsed Backbone Link Fileserver Link 100Base SolutionFileserver Link Multiport Bridge with High-Bandwidth Backbone 1000Base SolutionUsed as a Multiport Bridge Installation Rack Installation Supplying PowerPage Connecting the Switch Handling the Modules Module Installation and RemovalInsert the module Module Setup and InstallationInstalling 100Base-FX Modules Installing the ModulesInstalling 10/100Base-TX Modules Removing the Modules Installing 1000Base-SX/LX ModulesCompatibility with Ethernet Standards Physical CharacteristicsLED Indicators Switching ArchitectureAddress Table Forwarding RateAppendix B. Pin Assignments Switch Adapter Hub