Milan Technology MIL-S1000 user manual Installing the Modules, Installing 10/100Base-TX Modules

Page 37

Installing the Modules

Installing 10/100Base-TX Modules

a.Insert the RJ-45 connector on your cable into the socket of the Module.

b.Connect the other end of the cable to an appropriate device with a 100Mbps Fast Ethernet or 10Mbps Ethernet twisted pair interface.

c.Power up the Switch.

Installing 100Base-FX Modules

a.Remove the protective plastic covers from the fiber connectors on the Module.

b.Ensure that the Switch is powered up.

c.Plug the ST (or SC) connector on the fiber cable into the fiber socket on the Module.

d.Connect the other end of the fiber optic segment to an appropriate device fitted with a 100Mbps adapter.

Check the LED indicators on the front of the Switch to ensure that the Module is operating correctly.

Image 37

Contents MIL-S1000  Copyright Planning your Network Table of Contents IntroductionModule Install and Removed InstallationIntroduction Package Contents MIL-S1000 Front and Rear Panels Device Description, Features and CapabilitiesRed Full Duplex/Col indicators Page Ports 10/100Base-TX Module Ports 10/100Base-Tx Module FeaturesDip switch location and mode settings DIP Switch with Link Mode8 Ports 10/100Base-TX Module DIP switch functions 2 port 100Base-FX Module Front View Ports 100Base-FX Fiber ModulePorts 100Base-FX Fiber Module Features Page 4 port 100Base-TX/FX Front View Ports 100Base-FX Fiber Module Feature Location and setting duplex modePage 1000Base-SX/LX Fiber Module 1000Base-SX/LX Fiber Module FeaturesEnable N-way Full Duplex 10Base-T Ethernet Network Guidelines Planning your Network100BASE-FX Network Guidelines 100Base-TX Ethernet Network GuidelinesNetwork Planning 1000BASE-SX and LX Network Guideline10Base-T Networks Expanded NetworksExpanding your 100Base-TX network Class 100Base-TX NetworksCollapsed Backbone Link Fileserver Link 100Base SolutionFileserver Link Multiport Bridge with High-Bandwidth Backbone 1000Base SolutionUsed as a Multiport Bridge Installation Rack Installation Supplying PowerPage Connecting the Switch Handling the Modules Module Installation and RemovalInsert the module Module Setup and InstallationInstalling 10/100Base-TX Modules Installing the ModulesInstalling 100Base-FX Modules Removing the Modules Installing 1000Base-SX/LX ModulesCompatibility with Ethernet Standards Physical CharacteristicsLED Indicators Switching ArchitectureAddress Table Forwarding RateAppendix B. Pin Assignments Switch Adapter Hub