Milan Technology MIL-S1000 user manual Appendix B. Pin Assignments

Appendix B. Pin Assignments

RJ-45 station ports can be attached to any device which use a standard network interface (e.g., a workstation, server, bridge or router). RJ-45 daisy-chain ports can be cascaded to a station port on similar networking devices (e.g., another switch or hub). Use unshielded twisted-pair (UTP) for RJ-45 connections: 100 ohm Category 3,4 or 5 cable for 10Mbps connections or 100 ohm Category 5 cable for 100Mbps connections. Also be sure that the length of any twisted-pair connection does not exceed 100 meters (328 feet).

1

2

3

4

5

6

7

8

R D

R D

T D

T D

Figure B-1.RJ-45 Connector

Pin	Pin Station Ports 1 ~ 8	Cascade Ports
1	Receive Data +	Transmit Data +
2	Receive Data -	Transmit Data -
3	Transmit Data +	Receive Data +
6	Transmit Data -	Receive Data -
4,5,7,8	Not Used	Not Used

Table B-1.RJ-45 Pin Assignments