Milan Technology MIL-S1000 user manual Location and setting duplex mode

Port 1

Port 2

D IP S w itch Locati

Port 3

Port 4

O FF	1 2	O N
	3 4
Full D uplex		H alf D uplex

Figure 1-9.Location and setting duplex mode

The following Table1-3. lists the ports operating modes based on the DIP switch position.

	PORT 1	PORT 2	PORT3	PORT4
SW	1	2	3	4
ON	Half-Duplex	Half-Duplex	Half-Duplex	Half-Duplex
OFF	Full-Duplex	Full-Duplex	Full-Duplex	Full-Duplex

Table 1-3.4 ports 100Base-FX Fiber Module DIP switch functions

4 ports 100Base-FX Fiber Module Feature

"Conforms to IEEE 802.3u Fast Ethernet standard

"Support SC, ST, MT-RJ or VF-45 fiber connector (optional)

"Support half and full duplex via DIP switches

"Store-and-forward switch architecture for abnormal packets filtering