Milan Technology MIL-S1000 Ports 100Base-FX Fiber Module, port 100Base-FX Module Front View

Page 13

2 ports 100Base-FX Fiber Module

Figure 1-6.2 port 100Base-FX Module Front View

When installed into a MIL-S1000 switch, this Module provides a 100Mbps Fast Ethernet fiber port which can be used to:

#Connect the Switch to the backbone of your network; that is, to a basement switch, hub or router

#Connect the Switch to a 100Mbps server or end-station

An ST, SC, MT-RJ or VF-45 connector provides the link to the multi-mode fiber cabling and two indicators show the status of the Module at-a glance. A DIP-switch sets the operating mode to half duplex or full duplex (default).

Image 13

Contents MIL-S1000  Copyright Planning your Network Table of Contents IntroductionModule Install and Removed InstallationIntroduction Package Contents MIL-S1000 Front and Rear Panels Device Description, Features and CapabilitiesRed Full Duplex/Col indicators Page Ports 10/100Base-TX Module Ports 10/100Base-Tx Module FeaturesDip switch location and mode settings DIP Switch with Link Mode8 Ports 10/100Base-TX Module DIP switch functions 2 port 100Base-FX Module Front View Ports 100Base-FX Fiber ModulePorts 100Base-FX Fiber Module Features Page 4 port 100Base-TX/FX Front View Ports 100Base-FX Fiber Module Feature Location and setting duplex modePage 1000Base-SX/LX Fiber Module 1000Base-SX/LX Fiber Module FeaturesEnable N-way Full Duplex 10Base-T Ethernet Network Guidelines Planning your Network100BASE-FX Network Guidelines 100Base-TX Ethernet Network GuidelinesNetwork Planning 1000BASE-SX and LX Network Guideline10Base-T Networks Expanded NetworksExpanding your 100Base-TX network Class 100Base-TX NetworksCollapsed Backbone Link Fileserver Link 100Base SolutionFileserver Link Multiport Bridge with High-Bandwidth Backbone 1000Base SolutionUsed as a Multiport Bridge Installation Rack Installation Supplying PowerPage Connecting the Switch Handling the Modules Module Installation and RemovalInsert the module Module Setup and InstallationInstalling 10/100Base-TX Modules Installing the ModulesInstalling 100Base-FX Modules Removing the Modules Installing 1000Base-SX/LX ModulesCompatibility with Ethernet Standards Physical CharacteristicsLED Indicators Switching ArchitectureAddress Table Forwarding RateAppendix B. Pin Assignments Switch Adapter Hub