MaxTech V.42bis, V.32bis user manual S Registers Function Range/units Default

		Table 4-1 S - Registers
Register		Function	Range/units Default
S0	Auto-answer Ring		0-255/rings	0
S1	Ring counter		0-255/rings	0
S2	Escape code character		0-127/ASCII	43
S3	Carriage return character		0-127/ASCII	13
S4	Line feed character		0-127/ASCII	10
S5	Backspace character		0-32, 127/ASCII	8
S6	Dial tone wait time		0-255/seconds	2
S7	Remote carrier wait time		1-255/seconds	30
S8	Comma pause time		0-255/seconds	2
S9	Carrier detect time		0-255/0.1 second	6
S10	Carrier loss time		0-255/0.1 second	14
S11	Touch-tone dialing speed		50-255/0.001 second	70
S12	Esc. character detect time		0-255/0.02 second	50
S13	Reserved
S14	Echo, response, dialing,		Bit-mapped
	originate/answer
S15	Reserved
S16	Modem test options		Bit-mapped
S17	Reserved
S18	Modem test timer		0-255/seconds	0
S19	Reserved
S20	Reserved
S21	DTR, DCD, DSR, and		Bit-mapped
	Long Space Disconnect
S22	Speaker and response		Bit-mapped
S23	RDL, DTE data rate,		Bit-mapped
	parity,and guard tone
S24	Reserved
S25	DTR delay		0-100/seconds	5
S26	RTS/CTS delay interval		0-255/0.01 second	1
S27	Async operation, CCITT/		Bit-mapped
	Bell mode
S28	Reserved
S29	Reserved
S30	Sleep mode time		0-90/seconds	10
S37	Maximum line speed		0-11	0
S90	Disconnect timer		0-255/seconds	0
S108	Retrain options		0-3	2
S109	Line Speed permitted		2-62	62

Section Five - Result Codes

13