MaxTech V.42bis, V.32bis user manual Switch Block SW-1 Location Switch Block Settings

COM or IRQ setting for the modem is changed, the settings in the software must be changed to match.

Figure 2-3 Switch Block SW-1 Location

SW-1

Table 2-1 Switch Block Settings

COM Port	IRQ	SW1-1	SW1-2	SW1-3	SW1-4	SW1-5	SW1-6
1 (3F8)	4	ON	ON	OFF	OFF	ON	OFF
default
2 (2F8)	3	OFF	ON	OFF	ON	OFF	OFF
3 (3E8)	5	ON	OFF	OFF	OFF	OFF	ON
	4*	ON	OFF	OFF	OFF	ON	OFF
4 (2E8)	2(9)**	OFF	OFF	ON	OFF	OFF	OFF
	3*	OFF	OFF	OFF	ON	OFF	OFF

*Use these IRQs only if your software can not address IRQ5 or IRQ2

**When using Windows with the modem set for IRQ2, select IRQ9 in Control Panel

2.5Using Fax, Voice, and Speakerphone Capabilities of the Modem

Your modem has built-in advanced FAX, Voice, and Speakerphone functions. These functions are accessed through software. Please consult your FAX/Voice/Speaker- phone software manual about procedures on using these functions. Note that the modem's FAX/Voice/Speakerphone commands are used by the software to implement these functions and are not designed to be used as standalone AT commands.

Voice functions include recording and playback of voice prompts (files). To record or playback voice with your modem, attach a telephone to the RJ-11 jack marked

4