MaxTech V.32bis user manual MNP/V.42/V.42bis Commands, A3

		mode
&T_	&T0	Ends test in progress
	&T1	Perform Local Analog Loopback Test
	&T3	Perform Local Digital Loopback Test
	&T4	Grant Remote Digital Loopback Test
		request by remote modem
	&T5	Deny Remote Digital Loopback Test request
		by remote modem
	&T6	Perform a Remote Digital Loopback Test
	&T7	Perform a Remote Digital Loopback Test and
		Self-Test
	&T8	Perform Local Analog Loopback Test and
		Self-Test
&U_	&U0	Enable Trellis Coding @ V.32
	&U1	Disable Trellis Coding @ V.32
&V_	&V0	Displays Active and Stored Profile 0
	&V1	Displays Active and Stored Profile 1
&W_	&W0	Stores the active profile as Configuration
		Profile 0
	&W1	Stores the active profile as Configuration
		Profile 1
&Y_	&Y0	Configuration Profile 0 active upon Power
		on or reset
	&Y1	Configuration Profile 1 active upon Poweron
		or reset
&Zn=x	n=0-3	Store telephone number x into non-volatile
		RAM
%E_	%E0	V.22bis auto-retrain disabled
	%E1	V.22bis auto-retrain enabled
%G_	%G0	Enable Auto Fall Forward/Back
	%G1	Disable Auto Fall Forward/Back

3.5 MNP/V.42/V.42bis Commands

%An n=0- Set auto-reliable fallback character to n (where

127 n = 0 to 127,ASCII). Requires the \C2 setting

%C_	%C0	Disable MNP Class 5 data compression
	%C1	Enable MNP Class 5 data compression
\A_	\A0	64-character maximum MNP block size
	\A1	128-character maximum MNP block size
	\A2	192-character maximum MNP block size
	\A3	256-character maximum MNP block size

9