Liebert RAC2-8 manual Status Sub-menu cont’d, Set Options Sub-menu cont’d

Section 3: Operation

Status Sub-menu (cont’d)

The Alarm Delays screen indicates the time in seconds of an active delay on each unit. Active alarm delays count up while the condition is present and count down if the condition is cleared before the Alarm Delay time elapses.

4. R-DELAY

From the Status Sub-menu, press 4. R-DELAY to display the Restart

Delays screen:

RESTART DELAYS

0000 0000 0000 0000

0000 0000 0000 0000 PUSH CLEAR TO RETURN

The Restart Delays screen indicates the time in seconds of an active restart delay on each unit.

5. H-DELAY

From the Status Sub-menu, press 5. H-DELAY to display the Hold

Delay screen:

HOLD DELAY = 0000

PUSH CLEAR TO RETURN

Hold Delay applies to the system rather than to each unit. Therefore, only one number is displayed. This display indicates the time in seconds of an active Hold Delay.

Set Options Sub-menu

From the Main Menu, press 2. SETUP to display the Set Options

Menu:

SET OPTIONS MENU
1.	UNITS	2.	DELAYS
3.	TEMP/HUM	4.	STANDBY
5.	PASSWORD	6.	RETURN

1. UNITS

From the Set Options Sub-menu, press 1. UNITS to display the Set

Units menu:

Set Options Sub-menu (cont’d)

SET UNITS MENU

1.ZONES/UNITS

2.	EMER.OP	3.	LABELS
4.	SHUTDOWN	5.	RETURN

8 • User Manual (9/97)