Lucent Technologies GW-DS300N manual CA Server

Page 39

2

3 . P a s s w o r d T h e p a s s w o r d u s e d f o r

authentication. It may contain up to 63 ASCII

 

 

characters and is case sensitive.

CA Server

Use certificate chain When the EAP authentication type such as TLS, TTLS or PEAP is selected and required a certification to tell the client what server credentials to accept from the authentication server in order to verify the server, you have to enable this function.

Certificate issuer

Choose the server from the list to issue the certificate.

 

If“Any Trusted CA”is selected, any CA included in

 

the list (provided by the Microsoft Certificate Store)

 

is permitted.

Allow intermediate certificate

A server designates an issuer as a trusted root authority by placing the issuer's self-signed certificate, which contains the issuer's public key, into the trusted root certification authority certificate store of the host computer. Intermediate or subordinate certification authorities are trusted only if they have a valid certification path from a trusted root certification authority.

Server name

Server name must match exactly

Enter the authentication server name.

When selected, the server name must match exactly the server name found on the certificate.

34

GW-DS300N

Image 39
Contents Page IEEE802.11n Wireless PCIBus Adapter Foreword FCC Certifications Contents Advanced Configuration Introduction to GW-DS300N Features Package ContentsProduct Functions 2Basic Installation & Configuration How to install the driver and utility Basic Installation & Configuration GW-DS300N Basic Installation & Configuration How to make a wireless connection Basic Installation & Configuration GW-DS300N Authentication and Security Click on the Authentication GW-DS300N Basic Installation & Configuration GW-DS300N Site Survey Exit Launch Config UtiltiesUse Zero Configuration as Configuration utility Switch to AP ModeClickConnect Items DescriptionsAd-hocandInfrastructure Unknown,WPA-PSK,WPA2-PSK,WPAProÀle PSM Power Saving Mode When GW-DS300N Items Descriptions ConfigurationBasic Installation & Configuration GW-DS300N Basic Installation & Configuration Authentication and Security Basic Installation & Configuration As the settings of the destination There are seven authentication types underInfrastructure mode Basic Installation & Configuration WEP Key Basic Installation & Configuration 6 802.1x Setting Reauthentication, Roaming, SameSsidand Always CA Server Basic Installation & Configuration GW-DS300N Link Status GW-DS300N Statistics Items Descriptions Transmit StatisticsReceive Statistics Buttons 3Advanced Configuration3 Auto-Based on the status of the network Advanced Configuration GW-DS300N QoS Not sit idle waiting for input that may never come Start PBC WPS ConÀgurationGW-DS300N II. Start PIN GW-DS300N Advanced Configuration About Advanced Configuration How to use AP mode Soft AP ModeConÀg Only and 802.11 B/G/N mix. Wireless Mode Scroll down the list to choose the wirelessShown in the4.3. Security Setting Short Slot GW-DS300N ItemsDescriptions Authentication Security SettingGW-DS300N Soft AP Mode Disable ,Allow All , andReject All . The default Access ControlSoft AP Mode AID MAC TableSoft AP Mode Event Log Soft AP Mode Frames Transmitted Successfully After Retry Buttons Utility and Driver. Eeprom Electrically Soft AP Mode