Lucent Technologies GW-DS300N Access Control, Disable ,Allow All , andReject All . The default

4.4 Access Control

Click on the“Access Control”tab on the homepage of the AP mode and you can start to set the MAC address filter function. Please refer to the

4instructions below.

		Items	Descriptions
		Access Policy	Scroll down the list to set if you want to use access
			control function. GW-DS300N has three kinds of
			access policies:
			“Disable”,“Allow All”, and“Reject All”. The default
			setting is “Disa ble”.
			Disable – Do not use access control function.
			Allow All – Only the MAC addresses listed in the
			Access List can connect with GW-DS300N.
			Reject All – Only the MAC addresses listed in the
			Access List can NOT connect with GW-DS300N.
		MAC Address	MAC address is a unique identification for hardware
			devices on the network. It is a 12-digit hexadecimal
			value. Fill in the MAC addresses of wireless adapters
			you want to accept or reject to access GW-DS300N
			in this table.
		Access List	Here displays all the accepted or rejected MAC
			addresses.
		Delete	Choose a MAC address which you want to delete in
			the Access List, and click this button to delete it.
		Remove All	Click this button to delete all the MAC addresses in
			the Access List.
64
	GW-DS300N