HP UX 11i v2 Networking Software manual Local-phy-error

Table B-17 show ib sm port Command Field Descriptions (continued)

Field	Description
local-phy-error	Threshold at which ICRC, VCRC, FCCRC, and all physical errors result in an entry into the BAD
	PACKET or BAD PACKET DISCARD states of the local packet receiver. See section 7.12.2, Error
	Recovery Procedures, “InfiniBand® Architecture, Vol. 1, Release 1.0”, for more information.
local-overrun-error	Threshold at which the count of buffer overruns, across consecutive flow-control update periods,
	result in an overrun error. A possible cause of such errors is when an earlier packet has physical
	errors and the buffers are not immediately reclaimed.

Examples:

HP-IB# show ib sm port subnet-prefix fe:80:00:00:00:00:00:00

===============================================================

Subnet Management Ports

===============================================================

subnet-prefix : fe:80:00:00:00:00:00:00 node-guid : 00:05:ad:00:00:00:13:17 if-index : 1

mkey : 00:00:00:00:00:00:00:00 gid-prefix : fe:80:00:00:00:00:00:00

lid : 14 master-sm-lid : 1

cap-mask : 00:10:02:48 diag-code : 00:00

mkey-lease-period : 0 link-width-enabled : 3 link-width-supported : 3 link-width-active : 2 link-speed-supported : 1

state : active phy-state : linkup link-down-def-state : polling

mkey-prot-bits : 0 lmc : 0 link-speed-active : 1 link-speed-enabled : 1

neighbor-mtu : 2048

master-sm-SL : 0 VL-cap : vl0-vl7

VL-high-limit : 0 VL-arb-high-cap : 8 VL-arb-low-cap : 8

mtu-cap : 2048

local-overrun-error : 0…

The following example displays the ports of a node in summary form.

HP-IB# show ib sm port subnet-prefix fe:80:00:00:00:00:00:00 node-guid 00:05:ad:00:00:00:13:7f summary

============================================================================

Subnet Manager Port Summary

============================================================================

subnet-prefix node-guidif-index lid state

----------------------------------------------------------------------------

fe:80:00:00:00:00:00:00 00:05:ad:00:00:00:13:7f 1	0	active
fe:80:00:00:00:00:00:00 00:05:ad:00:00:00:13:7f 4	0	active
fe:80:00:00:00:00:00:00 00:05:ad:00:00:00:13:7f 5	0	active
fe:80:00:00:00:00:00:00 00:05:ad:00:00:00:13:7f 6	0	active
fe:80:00:00:00:00:00:00 00:05:ad:00:00:00:13:7f 9	0	active
HP-IB#

Defaults: This command has no defaults.

150 Switch Command Line Interface