HP UX 11i v2 Networking Software manual Syntax lanadmin -x-hipoibppa Syntax Example lanadmin -x -h

Output Example:

LAN INTERFACE EXTENDED MIB STATISTICS DISPLAY

Wed, May 19,2004 12:33:42

Interface Name	= lan9000
PPA Number	= 9000
Description	= lan9000 Hewlett-Packard IPoIB interface
Interface Type(value)	= infiniband(199)
MTU Size	= 2044
Speed	= 10000 Mbits/Sec
Station Address	= 0x0000040dfe800000000000000002c902000004e1
Administration Status	= up
Operation Status	= up
Last Change	= Tue May 18 13:21:45 2004
Inbound Octets	= 87686872019
Inbound Unicast Packets	= 70881852
Inbound Multicast Packets	= 0
Inbound Broadcast Packets	= 145
Inbound Discards	= 0
Inbound Errors	= 0
Inbound Unknown Protocols	= 5
Outbound Octets	= 61886639509
Outbound Unicast Packets	= 60868643
Outbound Multicast Packets	= 0
Outbound Broadcast Packets	= 11937
Outbound Discards	= 1289
Outbound Errors	= 0
Counter Discontinuity Time	= Tue May 18 12:43:48 2004
Physical Promiscuous Mode	= false
Physical Connector Present	= true
Interface Alias	=
Link Up/Down Trap Enable	= enabled

lanadmin Command Help There are two help options available for the lanadmin command:

•Brief Help

•Extended Help

Brief Help Description: This command displays an abbreviated version of help for the lanadmin command.

Syntax: lanadmin -x-h[ipoib_ppa]

Syntax Example: lanadmin -x -h 9000

Output Example:

lanadmin [-x if_info <ipoib_ppa>] [-x link_info <ipoib_ppa>] [-x all_if_info <ipoib_ppa>]

Use the "-H" sub-option for extended help.

Extended Help Description: This command displays a detailed version of help for the lanadmin command.

Syntax: lanadmin -x-H[ipoib_ppa]

Syntax Example: lanadmin -x -H 9000

Output Example:

lanadmin [-x if_info <ipoib_ppa>] [-x link_info <ipoib_ppa>] [-x all_if_info <ipoib_ppa>]

if_info: display ipoib interface parameter

link_info: display ipoib interface's link information

all_if_info: display all ipoib interface’s information

70 Administration and Management