HP UX 11i v2 Networking Software Name, Shutdown, Commands syntax is described in the table below

Syntax: link-trap

no link trap

The commands syntax is described in the table below:

Table B-51 link-trap Command Syntax Descriptions

Syntax	Description
no	The no keyword disables link-trap generation.

Command Modes: Configuration Interface (config-if) mode.

Privilege Level: InfiniBand read-write user.

Usage Guidelines: A link-up trap is generated when the operation status (oper-status) changes to up. A link-down trap is generated when the operation status changes to down.

Examples: This example enables link-trap generation for interface ports 1 and 5, on card 15. The resulting traps are sent to trap receivers, as defined by the config snmp trap-receiver command.

HP-IB(config-if-ib-15/1-15/5)# link-trap

Defaults: The default is no link-trap.

Related Commands: “shutdown” (page 187) “show interface ib” (page 163)

name

Synopsis: The name command assigns a name to one or more interface ports. The name can be used to simplify port identification and indicate its use.

Syntax: name name

no name

The commands syntax is described in the table below:

Table B-52	name Command Syntax Descriptions
Syntax	Description
name	A text string used to assign the port(s) on the InfiniBand card. The string is alphanumeric
	text up to 20 characters in length. If there are spaces in the string, enclose the entire string in
	double-quotes (““). Include the no keyword to reset this parameter to a null/empty string.
no	The no keyword returns the port to its default name.

Command Modes: Configuration Interface (config-if) mode.

Privilege Level: InfiniBand read-write user.

Usage Guidelines: This command sets the name field of the interface. Refer to the rules for name strings in “Using the Documentation” (page 131)

Examples: This example assigns the name “InfiniBand Group1-6” to the first 6 ports of InfiniBand card 15.

HP-IB(config-if-ib-15/1-15/6)# name "InfiniBand Group1-6"

Defaults: The default interface name is card#/port#.

Related Commands: “show ib sm configuration” (page 141) “show interface ib” (page 163)

shutdown

Synopsis: The shutdown command sequence enables or disables InfiniBand interfaces.

Syntax: shutdown

InfiniBand Commands 187