HP UX 11i v2 Networking Software manual Defaults This command has no defaults

Command Modes: User-execute and privileged-execute modes.

Privilege Level: InfiniBand read-only user.

Usage Guidelines: Internally, each node connection is implemented by 6 switch chips. Each switch chip runs its own subnet management agent. Externally, they are viewed by a subnet manager as interconnected switches and, therefore, each is listed by the node-info command.

The fields in the show ib-agent switch node-info output are described in the table below.

Table B-27 show ib-agent switch all node-info Command Field Descriptions

Field	Description
guid	Globally unique identifier of the node. The value is an 8-byte string.
type	Type of device this SMA supports. The value is always adapter.
lid	LID of the channel-adapter.
base-version	Supported base-management datagram version supported.
class-version	Supported subnet-management class.
port-guid	Globally unique identifier of the node port.
partition-cap	Number of entries in the partition table for channel Adapter, router, and switch management ports.
	This is, at a minimum, set to 1 for all nodes including switches.
device-id	Device ID information, as assigned by the device manufacturer.
revision	Device revision, as assigned by the device manufacturer.
local-port-num	Number of the link port which received this request, otherwise the value is 0.
vendor-id	Device vendor, per the IEEE standard.
trap-buffer	Special purpose string buffer for InfiniBand trap data.
num-ports	Number of physical ports on this node.
string	Node description string. Unicode characters are 16 bits.

Examples:

HP-IB# show ib-agent switch all node-info

======================================================================

SMA Node Information

======================================================================

guid : 00:05:ad:00:00:00:13:7f

type : switch lid : 2

base-version : 1 class-version : 1

port-guid : 00:05:ad:00:00:00:13:7f partition-cap : 1

device-id : a8:7c revision : 00:00:00:a0

local-port-num : 255 vendor-id : 00:05:ad

trap-buffer : num-ports : 9

string : slot 16: /dev/ts_ua0…

Defaults: This command has no defaults.

Related Commands: “ib sm subnet-prefix” (page 182) “show ib sm configuration” (page 141)

“show ib-agent switch” (page 156)

Show Commands 159