HP UX 11i v2 Networking Software Using DNS Services, Setting Administrative Roles, username, ib-admin, Enter the, Enter the, ib-commStr, community-string, community-string, About DNS Services

4.Enter the username command with the name of the user, the community-stringkeyword, and the new community string to assign this user.

HP-IB(config)# username ib-admin community-string ib-commStr

In the example above, ib-adminis the name of the user, community-stringis a mandatory keyword. ib-commStris the SNMP community string the user will have to use to execute other SNMP functions.

Using DNS Services

About DNS Services

The chassis must be told where to locate Domain Name Servers (DNS) so that it can contact these servers. The chassis uses these servers to resolve hostnames to IP addresses.

Setting Administrative Roles

About Roles and Privileges

Roles allow granular levels of privileges. The system combines multiple roles with read and read-write access for flexible control. These roles are enforced with the CLI.

The unrestricted administrator (super) is responsible for assigning these roles. Network administrators are given read-only and read-write access to each of the three network types.

Table 6-8 Information Accessible with IB Read/Write or IP Ethernet ReadOnly Permission

MIB Name	Permission levels that have access:
ipNetToMediaTable	ibReadOnly, ibReadWrite, ipEthernetReadOnly, ipEthernetReadWrite
tsIbSdpFilterTable	ibReadOnly, ibReadWrite, ipEthernetReadOnly, ipEthernetReadWrite
tsIbSdpTcpConnTable	ibReadOnly, ibReadWrite, ipEthernetReadOnly, ipEthernetReadWrite
tsIbSdpConnTable	ibReadOnly, ipEthernetReadOnly
tsIbSdpGlobal	ibReadOnly, ibReadWrite, ipEthernetReadOnly, ipEthernetReadWrite
tsIbSdpGlobal	ibReadOnly, ibReadWrite, ipEthernetReadOnly, ipEthernetReadWrite, fcReadOnly,
	fcReadWrite

Understanding Permission Levels

The following table displays the different access-levels.

Table 6-9 Description of Access Levels

Level	Description
ib-ro	InfiniBand read-only access.
ib-rw	InfiniBand read-write access.
unrestricted-rw	Read-write access to all network configuration commands.

Changing Privilege Access-Levels

1.Log in as the unrestricted user.

Only a user with unrestricted permissions may create and modify user accounts.

-360# Login: super

Password: xxxx HP-IB>

2.Enter the privileged-user mode.

104 Administration and Management