HP UX 11i v2 Networking Software Show ib-agent switch sl-vl-map, Out-ib-port, SL0 to VL mapping

VL-cap : VL0 - VL7 VL-high-limit : 0

VL-arbitration-high-cap : 8

VL-arbitration-low-cap : 8 MTU-cap : 1024

VL-stall-count : 0 HOQ-life : 7

op-VLs : VL0 - VL7 pkey-enf-in : 0 pkey-enf-out : 0

filter-raw-pkt-in : 0 filter-raw-pkt-out : 0 mkey-violations : 0 pkey-violations : 0 qkey-violations : 0 guid-cap : 1 subnet-timeout : 31 resp-time-value : 8 local-phys-err : 4 overrun-err : 0

Defaults: This command has no defaults.

Related Commands: “ib sm subnet-prefix” (page 182) “show ib sm configuration” (page 141)

“show ib-agent switch” (page 156)

show ib-agent switch sl-vl-map

Synopsis: The show ib-agent switch sl-vl-mapkeyword shows the service level (SL) to virtual lane (VL) mapping table for the nodes on switch devices.

Syntax: show ib-agent switch [card/port all] sl-vl-map

Command Modes: User-execute and privileged-execute modes.

Privilege Level: InfiniBand read-only user.

Usage Guidelines:

Table B-28 show sm ib-agent switch Output Descriptions

Output	Description
node-guid	64-bit GUID of this node.
in-ib-port	Ingress port number. The value is an integer between 0 and 255.
out-ib-port	Egress port number. The value is an integer between 0 and 255.
SL0 to VL mapping.

Examples:

HP-IB# show ib-agent switch 00:05:ad:00:00:00:13:7f sl-vl-map

======================================================================

SLVL-Map Table

======================================================================

node-guid : 00:05:ad:00:00:00:13:7f in-ib-port : 0

out-ib-port : 0 sl0toVl : 0 sl1toVl : 0 sl2toVl : 0 sl3toVl : 0 sl4toVl : 0 sl5toVl : 0 sl6toVl : 0 sl7toVl : 0

Show Commands 161