HP UX 11i v2 Networking Software manual Show Commands, Examples, Defaults, Related Commands

Examples

The examples section shows actual command entry and the results of executing it. For example:

HP-IB# show interface gateway 5

=============================Gateway Information============================ gateway : 5

name : 5/0

type : fc-gateway

desc : 5/0 (320)

last-change : none mtu : 0

admin-status : up oper-status : up

HP-IB#

Defaults

The Defaults subsection lists command defaults.

Related Commands

Provides hypertext links to other related commands.

Show Commands

The show commands are used to display user, configuration, network, and status information for the system. All users, such as super and guest, can apply these commands to view the system configuration, with a few exceptions. These exceptions are noted in the respective command descriptions.

Table B-1 Show Commands

Command		Description
show	arp	Show InfiniBand ARP route tables. See “show arp ethernet” (page 133)
	authentication	Displays the method of authentication. See “show authentication” (page 134)
	backplane	Show the SEEPROM (Serial Electrically Erasable and Programmable Read Only Memory)
		information for the system backplane. See “show backplane” (page 134)
	boot-config	Show image and configuration data used to bring-up the chassis. See “show boot-config”
		(page 135)
	card	Show card attributes such as type, slot, and status. See “show card” (page 136)
	card-inventory	Poll individual system interface cards for their system resources and resident image
		data. See “show card-inventory” (page 138)
	clock	Show the current system time. See “show clock” (page 139)
	config	Show the system:running_config(uration). See “show config” (page 139)
	fan	Show status of the fans maintaining system chassis temperature. See “show fan” (page 140)
show	host	Show DNS information for the chassis. See “show host” (page 141)
show	ib sm	Show the nodes, ports, and links being managed by the InfiniBand subnet manager. See
		“show ib sm configuration” (page 141)
	ib-agent	Show subnet management agent settings for the channel adapters and switches on the
		system fabric. See “show ib-agentchannel-adapter” (page 154).
show	interface ib	Show status and configuration of InfiniBand ports. See “show interface ib” (page 163)
show	ip	Show IP address and route tables. See “show ip” (page 168).

132 Switch Command Line Interface